12-31-2010, 07:02 AM Code 5-81 Data Light & Testing
Over the holiday the data light will be installed in as many boards as possible. Later, testing will be a separate project.
Is there any simple way to determine the wire gauge that fits into this tiny hole by the power slide switch (near the LED) in the Parallax Propeller Proto Board? (see photo in previous posts, with the yellow insulated wire)
BIG BRAIN made by Humanoido is a giant intelligent AI machine. Over twenty years in the making, living and sentient, approaching one trillion processors/constructs. Join us in the exciting adventure as it continues to evolve!
Friday, December 31, 2010
Power Regulator Modification
12-31-2010, 04:45 AM Code 4-80 Power Regulator Modification
This modification to the LM1086 CS-3.3 is now completed on all 20 Parallax Propeller Proto Boards.
The mod involves desoldering the voltage regulator's middle leg to disable all circuits behind the device.
Power is fed to all boards from an external power source. This reduces power consumption by disabling the power LED and two regulators.
This disables the power LED, however, the small modification described in the previous posts enables it to be recycled and function as a data light.
This modification to the LM1086 CS-3.3 is now completed on all 20 Parallax Propeller Proto Boards.
The mod involves desoldering the voltage regulator's middle leg to disable all circuits behind the device.
Power is fed to all boards from an external power source. This reduces power consumption by disabling the power LED and two regulators.
This disables the power LED, however, the small modification described in the previous posts enables it to be recycled and function as a data light.
LED Test Software
12-31-2010, 04:34 AM Code 4-79 LED TEST SOFTWARE
Here's some code used to test the LED modification on the Parallax Propeller Proto Board. The modification is described in several posts. It also runs on the Parallax Demo Board by changing the pin from 24 to 23. This is the reason for the LED ghost correction.
{{
The Brain Blob
LED Mod Test on the Brain Blob Project
Blinks LED on pin 24 using the Parallax Propeller Proto Board
Use pin 23 for demo board
by Humanoido
Friday December 31, 2010
}}
CON
_clkmode = xtal1 + pll16x ' 80MHz clock
_xinfreq = 5_000_000 ' 5MHz crystal
LED = 24 ' LED mod is on pin 24 Proto Board, pin 23 demo board
delay = 40_000_000 ' Approx 1 second on and off
PUB Main
dira[LED] := 1 ' Set LED pin as output
dira[22] := 1 ' correct ghost led on demo board
outa[22] := 0 ' correct ghost led
outa[LED] := 1 ' Initialize pin on
repeat ' Loop below
blink ' Do Private Method to blink LED
PRI Blink ' Private Method to blink LED
!outa[LED] ' Toggle state LED
waitCnt(delay+cnt) ' Delay
Here's some code used to test the LED modification on the Parallax Propeller Proto Board. The modification is described in several posts. It also runs on the Parallax Demo Board by changing the pin from 24 to 23. This is the reason for the LED ghost correction.
{{
The Brain Blob
LED Mod Test on the Brain Blob Project
Blinks LED on pin 24 using the Parallax Propeller Proto Board
Use pin 23 for demo board
by Humanoido
Friday December 31, 2010
}}
CON
_clkmode = xtal1 + pll16x ' 80MHz clock
_xinfreq = 5_000_000 ' 5MHz crystal
LED = 24 ' LED mod is on pin 24 Proto Board, pin 23 demo board
delay = 40_000_000 ' Approx 1 second on and off
PUB Main
dira[LED] := 1 ' Set LED pin as output
dira[22] := 1 ' correct ghost led on demo board
outa[22] := 0 ' correct ghost led
outa[LED] := 1 ' Initialize pin on
repeat ' Loop below
blink ' Do Private Method to blink LED
PRI Blink ' Private Method to blink LED
!outa[LED] ' Toggle state LED
waitCnt(delay+cnt) ' Delay
More about the LED Mod
12-31-2010, 04:17 AM Code 4-78 More about the LED Mod
Work begin on the LED mod. The photos show a yellow wire lead to pin 24 for tests. This re-enables use of the Parallax Propeller Proto Board's power LED and re-purposes it as a data light.
Power is fed to the VSS and Vdd junctions from the pin connector
The procedure requires scratching off the board resin before soldering from the back side. Wire wrap was not necessary.
Work begin on the LED mod. The photos show a yellow wire lead to pin 24 for tests. This re-enables use of the Parallax Propeller Proto Board's power LED and re-purposes it as a data light.
Power is fed to the VSS and Vdd junctions from the pin connector
The procedure requires scratching off the board resin before soldering from the back side. Wire wrap was not necessary.
Wednesday, December 29, 2010
Hardware Development
12-29-2010, 06:35 PM Code 4-70 Hardware Development
Hand sketched a circuit to lock in a method for a hybrid design today. This can one wire single duplex communicate at high speed or accomplish two wire full duplex at high speed. There's communication in a single cog with programming space left over for both methods and it can hardware adjust for speed as well. I look forward to trying out the designs and testing and reporting back here.
Hand sketched a circuit to lock in a method for a hybrid design today. This can one wire single duplex communicate at high speed or accomplish two wire full duplex at high speed. There's communication in a single cog with programming space left over for both methods and it can hardware adjust for speed as well. I look forward to trying out the designs and testing and reporting back here.
Software Overview
12-29-2010, 06:31 PM Code 4-69 Software Overview
It's talking (the brain) but now another co-software is being developed to up the complexity so the brain can load its own software (self loading) and do self modifying programming. Self loading makes it easier to stick code into 20 or more boards and self modifying program is good for recycling code space as RAM is somewhat of a premium at this point. It's a balancing act with the Propeller cogs. More on this after testing.
It's talking (the brain) but now another co-software is being developed to up the complexity so the brain can load its own software (self loading) and do self modifying programming. Self loading makes it easier to stick code into 20 or more boards and self modifying program is good for recycling code space as RAM is somewhat of a premium at this point. It's a balancing act with the Propeller cogs. More on this after testing.
Monday, December 27, 2010
Brain Blob Preliminary Specs
12-27-2010, 02:40 PM Code 3-55 Brain Blob Preliminary Specs
Preliminary Specs
21 boards
1 Basic Stamp 2 Module
20 Propeller Chips
20 Parallax Proto Boards
21 EEPROMs
...20x64K+1x2K=130,000 KBYTES
... approx 127MB
1 Board of Education
161 Cores with 80MHz Clock
160 cores at 20 MIPS = 3,200 MIPS
Expands to 1000x
320 Counters
US Serial Communication
Breadboards
External Power Source
1-Data Light per Board
Hybrid 1-Wire Half Duplex and
2-Wire Interface Full Duplex
BUS Design
Preliminary Specs
21 boards
1 Basic Stamp 2 Module
20 Propeller Chips
20 Parallax Proto Boards
21 EEPROMs
...20x64K+1x2K=130,000 KBYTES
... approx 127MB
1 Board of Education
161 Cores with 80MHz Clock
160 cores at 20 MIPS = 3,200 MIPS
Expands to 1000x
320 Counters
US Serial Communication
Breadboards
External Power Source
1-Data Light per Board
Hybrid 1-Wire Half Duplex and
2-Wire Interface Full Duplex
BUS Design
Brain Blobatory Breadboard Retrofit
12-27-2010, 02:03 PM Code 3-50 BRAIN BLOBATORY BREADBOARD RETROFIT
Parallax Propeller Proto Boards are fitted with tiny solderless breadboards. This enables wiring and rewiring, testing and various evolutionary changes in the circuit design, inclusive of necessary brain rewiring as brain evolution takes place.
Attach breadboards (available from Parallax) by peeling back the paper covering the sticky tape surface. To keep Proto Boards reusable without breadboards, afix some rolled tape instead as it's easily removed.
Design: every Proto Board will have one small solderless breadboard for testing, wiring and rewiring. Breadboards are best for designs that undergo an evolutionary process throughout their life span.
Brain Span Construction
12-27-2010, 01:25 PM Code 3-49 BRAIN SPAN CONSTRUCTION
The Brain Span includes the first three PPPB boards located above the Brain Base which is located above the Brain Stem. The top most board of the Brain Span is board number seven. The Brain Span brings the Brain Blob up to a total of seven boards with 49 computing cores.
Seen here, the Brain Span with three PPPBs is under construction. Note the added tiny solderless breadboards for board to board wiring.
Jumper Leads
![]() | |
| Jumper Leads for Brain building |
Make a set of jumper leads for testing and constructing various Big Brain boards. These jumper leads were created for injecting power to the PPPB boards for testing and programming. A piece of threaded black heat shrink tubing can be positioned when setting the leads. Red and black leads came from a package of alligator cables with assorted colors. Cut off the clips on the opposite and and tin the wires so the cable becomes solderless breadboard plug in compatible.
Subscribe to:
Posts (Atom)






