01-01-2011, 03:36 PM CODE 5-92 REVISED TEST SOFTWARE
Try this attached revised version b test software. The LED will remain on longer for testing, improving visibility and allowing wire to pin 24 adjustment and testing.
brainblobtest.spin
{
The Brain Blob by Humanoido
brainblobtest.spin
LED Mod Test on the Brain Blob Project
Blinks LED on pin 24 using the Parallax Propeller Proto Board
(Use pin 23 for demo board testing of this software)
Friday December 31, 2010
}}
CON
_clkmode = xtal1 + pll16x ' 80MHz clock
_xinfreq = 5_000_000 ' 5MHz crystal
LED = 24 ' LED mod is on pin 24 Proto Board
' LED = 23 ' pin 23 demo board
delay = 80_000_000 ' Approx 1 second on and off
PUB Main
dira[LED] := 1 ' Set LED pin as output
' dira[22] := 1 ' correct ghost led on demo board
' outa[22] := 0 ' correct ghost led on demo board
outa[LED] := 1 ' Initialize pin on
repeat ' Loop below
blink ' Do Private Method to blink LED
PRI Blink ' Private Method to blink LED
!outa[LED] ' Toggle state LED
waitCnt(delay+cnt) ' Delay