Showing posts with label demo. Show all posts
Showing posts with label demo. Show all posts

Sunday, October 20, 2013

Propeller Chip Tiny Digital Recorder

TINY DIGITAL RECORDER USING A
Demo Board rev D, E, F, click to enlarge
PROPELLER CHIP VOICE RECORD & PLAYBACK

Set up a Parallax Propeller chip with microphone in and speaker out (or run code on the Parallax Propeller Demo Board) to enable a digital recorder for a few seconds of sound record and playback, much like a unit sold at Radio Shack.

"It records one second of sound into the Prop's RAM (no SD card etc. needed), then plays that sound when another sound exceeds a sound threshold."

DISCOVERY POST
http://forums.parallax.com/showthread.php/105292-Parrot-Auto-voice-record-and-playback

The code is provided by Raymond at the Parallax Forum. "It uses the demo board's microphone (voice activated) to record·a second of audio. Then, it plays it back out the speakers a second later. After this, it will randomly either repeat or record again. Of course, this idea could be extended into a WAV recorder... This works good for recording something short like "Boo!" for Halloween effects. Nothing else is needed to store the record except the Prop chip itself. You don't have to have it say "boo" to be a Halloween feature... just a mysterious parrot.. unseen, but heard will offer up lots of fun. Just make sure that the mysterious parrot is loud enough, but coming from an impossible to determine source (maybe a ceiling speaker). Play with the timing and have it be a weird echo of sorts."

File Type: zip Parrot_8bit.zip‎ 18.5 KB

Beau Schwabe offers a variation with ECHO capabilities used in a Halloween application. "I was playing around with this object a little bit tonight for a Halloween prop, and I figured out a way to really sustain the echo for long periods of time (about 20 seconds). When you adjust the bit resolution, you can really get some funky robotic to large auditorium sound effects..."

http://forums.parallax.com/showthread.php/97402-Microphone-to-Headphones-Object?p=681482&viewfull=1#post681482

Propeller Echo Test - Happy Halloween.zip‎ 1.89 MB 

PropellerEchoTest_laugh.zip‎ 1.89 MB
Propeller Echo Test.spin‎ 3.9 KB
PropellerEchoTest_8.zip‎ 568.2 KB
PropellerEchoTest_10.zip‎ 591.3 KB

For downloading a schematic that includes revision G:
http://www.parallax.com/sites/default/files/downloads/32100-Propeller-Demo-Board-Schematic-RevG_0.pdf

Microphone-to-VGA demo in the OBEX. http://obex.parallax.com/object/80 

Sunday, July 7, 2013

Propeller LED Machine

PROPELLER LED MACHINE
From August 26th, 2010
Updated July 7th, 2013
 
The LED Machine is made from one Parallax Propeller chip and wiring with banks of LEDs connected to the chip through 100 ohm resistors (color coded brown black brown) on a 3.3-volt circuit.

The 32 LEDs are on all 32 ports. All eight cores are filled, each core with up to 125 Vprocessors for testing programs. This is a new test board, designed to supplement the Demo Board. It was put together in 20 minutes, mainly from resistors and LEDs. This is the virtue of breadboards. The new board can handle every pin on the prop, and it's decoupled and clock enhanced yet can be rewired in only a few seconds. As you can see, it was decided to have the power supply external to the breadboard. The LED machine's original purpose is to test Vprocessors. Vprocessors were created with this chip in banks for testing from one up to a total of 1,000, with a method to switch banks. After the booting process, all pins on the Propeller chip are available. LED colors are staggered between red and yellow to help identify pins, processors and programs. This works in terms of current draw because not all LEDs are on at the same time. Test programs blink LEDs according to specific unique cycles.