Sunday, December 8, 2013

M3T Telescope Molecular Titan

MOLECULAR TITAN

Black Hole Space Time Eggs

BLACK HOLE SPACE TIME EGGS


Mainland China Laboratory Shut Down

This photo shows a Mainland China sky polluted a thousand times worse compared to last September, prompting immediate Lab closure. For more information, refer to the link.
AIR POLLUTION - A NUMBER ONE KILLER!
MAINLAND CHINA LABORATORY SHUT DOWN
We deeply regret, due to critical "death causing" levels of pollution, the laboratory in Shanghai was shut down yesterday with no one left alive to manage the property.

The large number of deaths in China prompted the decision to shut down and pull out immediately. Wind also has carried critical hazardous heavy levels of "Mainland China" pollution directly over Taiwan, the Taiwan Lab, the ocean beyond Taiwan, and has entered the Jet Stream - carried to other parts of the world.

— regrettably, the science team spent more time in the hospital than in the laboratory —

All Earth-based HRL telescopes were shut down in Taiwan six months ago, due to wind-carried China pollution causing sky destruction and atmospheric acid destroying Earth-bound lab located primary telescope mirrors and optics. The program now focuses only on Space-bound telescopes and observational programs beyond Earth orbit.

— those thinking about moving to Mainland China may want to think twice, for health reasons —

Primary results from pollution were lung cancer, black lung, chest pain, vision impairment, bleeding burning eyes, blurred vision, partial vision loss, blindness, emphysema, inability to breathe, shortness of breath, immune failures, skin and other allergies, heart failure, hypoxia, skin disorders, welts, blisters, burns, caustic anomalies, lymphatic node infection, chronic coughing, croup, burning throat, spitting up blood, stress tinnitus, itch, rash, severe aches and pains, body stress effecting work and life, causing missed work, sick days, and other respiratory ailments and diseases. Regrettably, the science team spent more time in the hospital than in the laboratory.

This comes after a pollution black out caused the Beijing laboratory shutdown earlier. The Beijing Observatory was using the heavy pollution levels in the sky as a telescope filter in observing the sun, ironically blocking harmful solar rays, a positive from something so negative. However, increases in air pollution caused a solar blackout and observatory closure when the sun's rays could not penetrate in sufficient quantity to continue the consecutive solar observational program.

Thousands of deaths were reported due to the air quality which contains several mixed types of pollution.

The last living scientist reported several types of known mixed pollution including chemical (from airborne stack created particulates and land/ocean dumping, manufacturing), gas and smoke (from coal burning to provide heating energy to homes), dangerous air born metal particulates inclusive of heavy metals, and poisons due to mining and toxic waste fed directly into the air, earth and water.

Large amounts of hazardous Heavy Metals and reported increased levels of radioactivity were found in the air and in the food and as water contaminants. Natural underground water reservoirs were found contaminated. Planted food crops were found to contain large amounts of contamination, the apparent result of either air borne pollution fallout and contaminated ground water, acid rain, or all three.

The report finds no solution at hand. In fact, it was reported that the China government increases pollution levels to a higher amount year after year, with no end in sight. Until a solution is found and successfully implemented, it's expected that future science, laboratories, and businesses will steer clear of Mainland China.

The Laboratory is erecting a memorial and dedicating December 12th as a day to observe those millions of innocent people who died due to air pollution.

We urge everyone everywhere to wage war against pollution. We implore everyone to come to the rescue of poor Chinese people who suffer and have lives ended prematurely from deadly pollution. Please help develop solutions for this world wide problem.

We made this plea in September. Who was listening?
http://humanoidolabs.blogspot.tw/2013/09/deadly-pollution.html

The Jet Stream
http://humanoidolabs.blogspot.tw/2012/02/jet-stream.html

Saturday, December 7, 2013

M3T Massive Molecular Mining Telescope Views Titan

M3T MASSIVE MOLECULAR MINING TELESCOPE IMAGES SATURN'S MOON TITAN
Penetrating Titan's thick atmospheric shroud is a great challenge. Our data observatory is mining the molecular constructs within and under the atmosphere of Moon Titan.

Why? Titan is a very rich moon, filled with a lifetime supply of wealthy hydrocarbons and natural oil, just ready for shipment back to the Earth and Mars as a source of pure energy. Merely scoop it up from the oil lakes and atmosphere - ready for the plucking.

This black gold could power the Earth for generations to come. Soon the oil deposits on the Earth will be depleted and space barging mineral wealth back to the Earth will become an important business.

Our space program is focused on Titan. We're building the Robotic Titan Moon Explorer and continuing to watch the moon with our telescopes to gather data for a future landing and mining operation.

This M3T Telescopic visible energy view is a precursor to the upcoming molecular view. Surprisingly, visible energy shows detail and a penetration through the thick veil of smog clouds. Study shows Titan has heavy smog from methane and hydrocarbons, even lakes of thickened oil, and glimpsing detail through the air is a great challenge. When it happens as seen on this data image, it's a rare event.

Stay tuned for the new upcoming view in moleculars. It sure to be spectacular, unlike anything ever seen before!

Brain Cortex Time Part 50

How long can this old electric machine brain live throughout the ravishes of time? Can this machine brain break the barrier from Shallow Time and enter into the cosmic realm of Deep Time? Will the project dream of moving closer towards the ultimate journey of immortality ever be fulfilled?
BRAIN CORTEX TIME part 50
How can we explain the inexplicable? What is the progression of time inside the brain cortex jar as it moves towards eternity? Is is possible to break the barriers of a short term time and lead into long term time?

When it comes to the machine brain and technology inside the Universe, and inside the jar, there are at least two types of time - Deep Time and Shallow Time. Earthlings composed of biological material experience Shallow Time, which is a time reference frame that merely exists on the surface of a much deeper time frame.

For example, Earthlings live on the average close to 80 years, some more, some less. However this is but a mere blink of an eye in the realm of the grand cosmic time frame, our home, which takes billions and billions of years to see the motions of spinning galaxies and the evo periods of a changing Universe.

So is it possible to create a machine that can cross over from one time frame to another? Can the machine brain cortex in a jar cross over from Shallow Time into Deep Time? We believe the answer is yes but to accomplish this is not so easy. The solution will depend on creating a brain that can live far longer than the blink of an eye within the cosmos, a machine brain that can live not just hundreds of years but well into the thousands of years.

How can this be accomplished? Some ways moving towards this goal are longer life components, the ability to replace components, a schedule of continuing maintenance, ability to repair anomalies, avoidance of catastrophe, a jar handover based on repeated strings of caretakers, and a lasting design that can carry it far into the future. It is also beneficial to have plans for upgrades, to redesign the containment as old parts become obsolete and can no longer be found, and to incorporate new technologies into the design.

Index to the Brain Cortex
http://humanoidolabs.blogspot.tw/2013/11/brain-cortex-index-part-16.html

Friday, December 6, 2013

Brain Cortex Board Design Part 49

BRAIN CORTEX BOARD DESIGN PART 49
BRAIN BOARD BEGINS GROWTH
One cortex board version is seen to the left of the 3-liter jar, with one Parallax Propeller chip. This design is assembled on one solderless breadboard from E.I.C. ® Taiwan which is ISO 9001-2008 Approved. Eight of these boards were purchased for the Brain Cortex in a Jar project, which could hold 8 chips and 64 RISC processors. Each board holds 1 chip and 8 RISC processors.

The jar holds two connected solerless breadboards, each 2 1/8" wide x 3 5/16" long x 3/8" high (including two power rails, one on each side consisting negative and positive terminal rows). It's determined that two of these boards joined together fit into the jar and can be rotated into position with a mounting on top of the power units.

Principle features of the single Cortex board include the following:

* Parallax Propeller Chip
* 32K HUB RAM
* 32K ROM
* 8 Parallel RISC Processors
* Prop Tool
* Red LED Input/Output
* Speaker
* Decoupling Capacitors
* Chip Crisscross Wiring VSS/VDD
* Solar Panel Circuit with Schottkey Diode
* BOE Brown Out Enable - Disable Circuit with Resistor
* 32K EEPROM
* Crystal for 80mHz operations
* Power Supply Quadruple Filter
* CdS Light Sensor with Resistor Capacitor

Index to the Brain Cortex
http://humanoidolabs.blogspot.tw/2013/11/brain-cortex-index-part-16.html

Wednesday, December 4, 2013

Brain Cortex Wire Sump Part 48

Remove the clothes pin and push the wires down into the square space known as the power sump. These strand wires have enough flexibility for installing and removing batteries.
BRAIN CORTEX WIRE SUMP PART 48
DEEP DOWN IN THE SUMP INTESTINAL SPACE OF THE BRAIN CORTEX, AT THE LOWEST DUNGEON PORTION OF THE JAR, IS SOMETHING IMPORTANT!

In this important brain assembly step, all wiring thus far is moved to within the power unit sump. The power unit sump is the empty space directly in front of each battery. It's a large square hole with three purposes, 1 ) to offer enough space to insert and remove batteries, 2) serve as a space to hold wiring, and 3) to clear the space on top of the battery holders for mounting the circuit boards. Wiring placed in this position is flexible enough when removing and installing batteries, and is moved out of the way for mounting the brain boards. Try to matte down the wiring to the jar floor.

Index to the Brain Cortex
http://humanoidolabs.blogspot.tw/2013/11/brain-cortex-index-part-16.html

Brain Cortex Spirit Thermometer Install Part 47

Thermometer locates between two power units
BRAIN CORTEX SPIRIT THER- MOMETER INSTALL 

PART 47

Position black and red wires behind the thermometer
It's important to monitor the jar's core battery temperature status when recharging. This inexpensive and simple solution will do just that!

At the moment batteries become warm during the charging process, it's an indication the charging process is complete.

It may also indicate that the trickle charger is trickling too much and adjustment to the charging power grid is required.

Unit is next to the solar panel grid
This blog details the installation of a low cost small spirit thermometer inside the Brain Cortex jar. The thermometer is placed in a position, opposite the electric thermometer and lower in between two twin power units to read their heat signature.

The position of the single spirit thermometer is a drop down in between the corners of two twin power units.

The spirit filled traditional small thermometer has ~ -30 to +50 degree Centigrade scale, intended for food freezer use. The unit is part number G-590. The glass tube is the same length as a 1.5-volt D-size battery. 

It has a scale in one degree increments. The goal is to attach or place this thermometer to the proximity of a battery and monitor the charging temperature during the charging process, and continuously monitor the battery temperature to assure everything is nominal.

Accurate reading of the tiny scale may need a magnifier
The thermometer can stay mounted inside the jar, remaining with close contact with a single battery for continuous monitoring and inspections.

The analog temperature will be read through the transparent jar by visual inspection, as the unit is placed in contact with the interior transparent jar wall.

Early tests show the higher mounted electric thermometer reading 73 degrees Fahrenheit and the spirit thermometer, which contacts the jar floor, reading 72 degrees Fahrenheit, a nominal temperature difference of 1 degree due to the strata positioning.

Like other traditional thermometers of this type, there is no maintenance. Purchaed from a dollar store, at more than a dollar, the cost was NT$85. The thermometer may be purchased at this source: http://www.double-sun.com.tw

The spirit thermometer can be used in tandem with the electric thermometer, obtaining a cross gradient and cross section of battery and jar room temperature, for better assessment of the jar's Eco-environment.

Principle concern is for the electronics, especially the Parallax Propeller chip which is rated at a median temperature of 50 C during tests according the to specification sheet.

There is a meltdown jar temperature and this limit may be reached long before the Propeller chip upper limit is reached.

LINKS
Index to the Brain Cortex
http://humanoidolabs.blogspot.tw/2013/11/brain-cortex-index-part-16.html
Thermometers
http://humanoidolabs.blogspot.tw/2013/10/brain-cortex-thermometers-part-9.html
Electric Thermometer Source
http://www.double-sun.com.tw

Tuesday, December 3, 2013

Brain Cortex Thermometer Hygrometer Install Part 46



The electric unit is a combo thermometer and hygrometer for monitoring temperature and humidity inside the brain cortex jar. In the first experiment, a small high intensity lamp was placed near  the jar in an orientation that would have capacity to charge the inborn solar panel. What was noticed after 5 minutes, the internal temperature rose to an excess of 80 degrees F. and the humidity exceeded 53% RH. To normalize the jar'd environment, the lid was removed. It's not expected that high intensity lamps will often charge the jar brain in close proximity so this is an extreme case and lid removal may not be a frequent requirement.

The rating of the Parallax Propeller chip median of temperature tests is 122 deg. F. according to the Propeller Data Sheet V12, and it's expected the jar would not reach those temperatures in a temperature stable room environment. At maximum chip temperature extremes, it's likely the polymer jar substrate would melt. The polymer jar was chosen over a glass jar due to its light weight, ability to resist impacts, earthquakes, and ease of which components and structures can mount to its surface. Jar specifications may be established at a future date.
BRAIN CORTEX ELECTRIC THERMOMETER HYGROMETER INSTALL PART 46
It's time to install the electric thermometer and hygrometer monitoring unit to measure the temperature and relative humidity inside the brain cortex jar, making sure the brain is comfortable inside its new home.

The unit is mounted with one half-inch angle bracket, a quarter-inch brass spacer, two washers and a nut.

The hole in the polymer jar is just under the red lid, and is low enough so as not to interfere with its placement.

At the given angle of the jar wall under the lid side, mounting the angle iron here places pressure on the electric unit, keeping it in place, without any mechanical connection.

The bottom of the unit rests on the top of one twin power unit without any fasteners needed. The top of the unit is anchored using a small angle iron that keeps constant pressure on the case (as seen in the photos). Just enough clearance allows the jar lid to screw on tight.

The LCD faceplate is easily read through the transparent three liter jar with ambient light and no back lighting is needed.

The module has a self contained button battery, easily replaced after a year or more of operations. The unit is constantly on.

This unit is a Taiwan battery operated (LR1130) electronic thermometer and hygrometer, part number TH-233B.

It has a temperature range from -50 to +70 degrees Fahrenheit, or -58 to +158 deg. F. The hygrometer ranges from 20% RH to 99% RH. The accuracy is +/- 1.5 deg. C. The unit housing is 75(L) x 65(W) x 13(D) mm. Cost was NT$200.

This unit has a large digital LCD display with a segment font, and is easily read when accessing the home jar interior status from the outside of the jar. The temperature and relative humidity will be read through the trans jar but there is no direct connection to the Brain. The unit is for monitoring purposes only.

Other than a poke hole for changing the Centigrade reading to Fahrenheit, this unit has no controls and runs automatically. For more information, refer to the index/directory in the links below.

LINKS
Index to the Brain Cortex
http://humanoidolabs.blogspot.tw/2013/11/brain-cortex-index-part-16.html
Thermometers
http://humanoidolabs.blogspot.tw/2013/10/brain-cortex-thermometers-part-9.html
Electric Thermometer Source
http://www.double-sun.com.tw

Brain Cortex Power Wiring Part 45

BRAIN CORTEX POWER WIRING PART 45
ELECTRIC JUICE  It's time to attack the brain cortex wiring and complete this phase of the project. Let's get some electric juice going! The jar is home to the brain cortex. Every home needs electrical wiring and the brain's jar is no different. The electric juice will power the brain, lighting, speaker, and sensors.

Wire each twin power unit like this
The next step is wiring the power unit. In this procedure, the battery holders are removed and the ends (+ and -) black and red wires are connected together with yellow twists. Be consistent by connecting the wires on the right sides of the twin holders.

Snap in a size D battery into each battery holder.
Insert batteries outside of the jar
Initially we're using Zinc Carbon batteries (Philips LongLife R20).


Now cut four black wires and four green wires, each 5-inches long, and strip the ends. Connect these with yellow twists to the left side wires on the battery holders. Attach a small piece of Scotch tape to insulate
Taped ends prevents shorts
one end of each wire to prevent a short during the installation.


Measure the voltage of each twin power unit. Remember, a twin power unit equals two batteries and two battery holders connected together in series to obtain 3 volts. (The voltage of new batteries not under load
Finished wiring - test shows 3.13 volts
will be slightly higher than 3 volts.)


Reinstall all battery holders, remembering their correct positions to fit into the jar holes.

Gather up all the green wires, insert one 5" length of green solid wire, and twist the ends together with the  yellow twist. Repeat for the red wires. The two lengths of solid wire will connect to the solderless breadboard. Use a plastic clothes pin to hold all the ends together. Test again for voltage. In the test, the meter shows 3.13 volts for new Zinc-Carbon D cell batteries connected together. Note: during this procedure, the Solar Panel red and black wires are left floating. These may connect later to the solderless breadboard.

The Chinese yellow wire twists are sold in Taiwan, in a package of 20 for NT$20 obtained from the dollar store. The brand is manufactured under authority of Sellery Inc. California USA, and the DIY item number is TE-18. http://www.sellerytools.com  886-2-26103915

Note: The battery holders each have a red and black connection wire. Supply a 5-inch length of wire and connect it to the lowest wire nearest to the jar floor. This enables it to reach the top where similar colored wires connect together. 

Index to the Brain Cortex
http://humanoidolabs.blogspot.tw/2013/11/brain-cortex-index-part-16.html