Massive Brain Power & Energy

Massive Brain Power & Energy
The human brain when fully engaged can burn a whopping amount of calories. Throw in other factions of the human brain - memory, creativity, thought and analysis, derivations, imagination and visualization, multitasking, mathematics and logic, left side use, right side use, Cortex engagement, and the burn factor can shoot the roof.

This is obviously less and even minuscule for the less fortunate less engaged people with less brain power (who often go through life using a mere 2% of brain capacity) and far more in people who have learned to use substantial and significant amounts of their brain.

Space1 Modified Hadron Collider

SPACE1 DIY PROJECT
BUILD YOUR OWN MODIFIED HADRON PARTICLE ACCELERATOR
SPACE1 MODIFIED HADRON COLLIDER
When it comes to decoding and unraveling the elements and details of the Quantum Universe, using a specially modified Hadron type collider is essential. Here we demystify various components of the particle collider and illustrate various aspects of its design.

The modification involved in the Space1 Dynamic Quantum Particle Accelerator deals specifically with bonus observations of particle collision results before the collision happens according to the Quantumverse.

Hadron PHOS

Hadron configures to look for parallel universes and create mini black holes

The Space1 Dynamic Quantum Particle Accelerator is increased in power yet scaled in physical size to fit a region of less than 17 miles. Modifications may be published in the future.

Space1 Quantum Lab
http://humanoidolabs.blogspot.tw/2015/11/space1-quantum-lab.html

QUADLYZER QUANTUM ANALYZER
http://humanoidolabs.blogspot.tw/2012/10/quadalyzer-quantum-analyzer.html

Large Hadron Collider Unveiled
https://en.wikipedia.org/wiki/Large_Hadron_Collider

Particle Detection Models
http://build-your-own-particle-detector.org/models/lhc-micro-models

Parallel Universe
http://www.express.co.uk/news/world/565315/Scientists-at-Large-Hadron-Collider-hope-to-make-contact-with-PARALLEL-UNIVERSE-in-days 

Large Hadron Collider Research
http://www.stfc.ac.uk/research/particle-physics-and-particle-astrophysics/particle-physics/large-hadron-collider/ 

Repository for technical assembly manuals
http://iopscience.iop.org/1748-0221
 

Space1 XRocket XMotor

Take out the rubber o-rings from NASA's SRB engine and you essentially have a version of Space1's contiguous safety motor. The safety motor has no fitting dealing with rubber o-rings or a duplicity of physical end to end attachments. The charge is pure and continuous making it the most reliable motor in the industry for space travel. The motor is matched 100% to Space1's largest and most powerful rocket, the XRocket, designed to safely take tourists into space. This is a safety rocket. The massive motor is compatible with recent developments of booster staging, placing the Space1's XRocket into the highest lofting capacity and lifting capacity rocket of all time. This means more astronauts can fit into the spacecraft, astronauts can fly higher, and more supplies and instruments can stow on board.

SPACE1 X-ROCKET X-MOTOR
THURS JULY 23 2015

Space1 contracts with one of the "longest in business" and most reliable suppliers of rocket Engines. This current cycle has included a supply ranging to the most powerful rocket motor supplied by this high technology source.

SPACE1 XMOTOR
This is the powerful Xmotor. Space1 has redesigned a rocket around this motor and is currently in the testing program.

SPACE1 XROCKET
By design, the XRocket is the only rocket in Space1's fleet that can handle the power of the XMotor. The XRocket is fit specifically to the size of the XMotor using fitting retainers.

ROCKET FITTING RETAINER
Space1's rocket fitting retainer is the full XMotor interface machined to fit the XRocket. Boosters and motors both utilize the safety rocket retainer interface.

ASSEMBLY PROGRESS
Work is in tri mode, for developing and testing the XRocket, XMotor installation, and Booster Interface.

Index of SPace1 Web Pages 
http://humanoidolabs.blogspot.com/2015/01/space1-links-in-january-2015.html

Power Telescopes & Extreme Machines Book

POWER TELESCOPES & EXTREME MACHINES BOOK
The story of how one book and sixteen power telescopes changed the world.

Humanoido has completed the book of Power Telescopes and Extreme Machine inventions.

Three years in the making, this 127 page book summarizes and records Humanoido’s technology inventions, scientific historical developments and many of the discoveries made, with images, as a point of reference for documentation in United Humanoido Laboratories UHL.

Second Edition Book Cover

During the PTI Power Telescope Initiative, a three year period from February 2012 through May 2015, sixteen powerful new telescopes and approximately sixteen extreme machines were constructed and put into operation above the Earth.

By May 1st, 2015, the project was complete with telescope number 16, the Symbiotic Symbiosis Telescope SST. Humanoido's telescope companies were merged with Space1 in 2014 to rapidly advance space tourism. Space1 venture was founded to develop the Safety Rocket and take tourists into space.

A Big Brain supercomputer with 240,000 processors was enabled and configured to operate the Power Telescope series.

How did these telescopes originate? Conventional telescope technology had reached an impass. While stationed in Taiwan, 8,000 miles from the USA laboratory, humanoido was determined to make the worlds largest and most powerful telescope.

However, four main obstacles existed.

1) It would take 10 years to build
2) It needed a million dollars in cost
3) There was no place to keep a massively large telescope
4) Rainy humid overcast weather prevailed resulting in poor seeing conditions unsuitable for any massively large telescope.

By some ironic nature, where special events are best described in another book, humanoido sat down one evening and invented the Power Telescope.

Humanoido had located glass to grind and polish the primary objective of a conventional telescope. The glass was 72 inches in diameter and would be useful in creating a large amateur telescope. However, would this give the new breakthroughs desired in the science of the universe?

The PT Power Telescope was over ten times larger than the 72-incher, and larger than the largest optical telescope ever previously created in the world. The first PT was initially about one thousand inches in diameter. By comparison, the Earth-based Gran Telescopio Canarias built from 2006 through 2009, located on the Canary Islands, was only about 400 inches.

The development of PTs did not stop at the first one. Increasingly larger and larger iameters were created, exceeding thousands of miles in aperture. This became a continuing revelation, for example: one telescope is equal in aperture to the width of the Solar System, and others following that approached Universe sizes.

Perhaps the best performance telescopes in the Power Series are those with different power mechanisms that drive the telescope in ways previously unknown to telescopes and astronomical observing. These operate with different astrophysics, such as interpolation, extrapolation, gravatomics, moleculars, inference, symbiosis, power dynamics, gargantuans, paradigmics, and genius methodology.

The telescope satisfied the original four objectives criteria list. It immediately became the world’s largest telescope, was built and assembled in a single evening, was parked in outer space with plenty of room available, was located high above the degrading effects of Earth’s atmospheric resulting in perfect seeing conditions in the vacuum of space, and it was created from special cache of parts in space worth trillions of dollars, free for the taking by a special partnership.

After the first telescope, more inventions of space and time, including the Extreme Machine series, allowed for the creation of more Power Telescopes.

These machines were designed with compatibly in mind, using a special pipe mount interface for each extreme machine to fit to the power telescopes. Another paramount feature is the compatible evolved Boiler Plate that handles the output.

Overall, the book describes many fantastic discoveries and visions made with the telescopes and shows remarkable discovery photos. Many photos presented are First Light telescope photos showing the remarkable performance achieved.

It was not uncommon to point a telescope at an empty hole in the sky and see billions of objects suddenly appear...
 

Space1 Links
http://humanoidolabs.blogspot.tw/2015/01/space1-links-in-january-2015.html

Symbiotic Symbiosis Telescope SST
http://humanoidolabs.blogspot.tw/2015/04/symbiotic-symbiosis-telescope-sst.html

Big Brain Supercomputer
https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEizBg2a3i-2bpnIA1RjxxFL0l9kvrLXVrWQw75GIhtYCGXHOUiT1az0NN5FLLhc-KpzxylvSGi63snWRvj2vibTYnU1qkpM-_yFxDp741GuFz9cSg1mszyjDBKRBnf1W6TQnD00TKvrMFIw/s1600/wiring.jpg

http://humanoidolabs.blogspot.tw/p/about-big-brain.html 

Symbiotic Symbiosis Telescope SST

Symbiotic Symbiosis Telescope SST

 

Finalized prior to May 1st, 2015, at number 16 in the list of super power telescopes, the Symbiotic Symbiosis Telescope SST can overlay two chameleonic states to create one symbiosis. The ST Telescope adds useful functions and contributes to the array of power telescopes as a new addition telescope created after the OT telescope.

FM Radio Station QSL Card

FM RADIO STATION QSL CARD
Whisper Radio FM 102 releases the first version QSL reception card

Data given shows the location of the radio station as shown on a world map, the full output power of the transmitter in mWATTS, and the frequency of the radio station's transmitter in million of Hertz. The card contains the official seal of Humanoido Laboratories and the URL of the official blogspot.

A photo depicts the unique and historical first time setup when the radio station aired its first broadcast. The card is designed to confirm your FM radio reception for a given time, date, and program heard. Upon receipt of your email reception information, the E-CARD will be filled out with the appropriate data and emailed to you - the recipient. The email address to use is listed under "CONTACT" at the blogspot.

http://humanoidolabs.blogspot.tw/p/contact.html

To obtain the prestigious Whisper Radio Station's QSL card, listen to our broadcast noting the name of the program, time, and full date (day, month, year). Include your location, the strength of the signal on the 0-10 scale with 0 equal to no reception and 10 representing best reception. A QSL card cannot be given out without this information.

Other information is very useful. How stable is the signal, does it flutter, fade in and out, or remain steady? How long did you listen to the broadcast? Which receiver and antenna was used? You may apply for more than one QSL card with multiple dates and times of reception.

Whisper Radio's QSL cards are extremely valuable and rare, due to the part time intermittent nature of the programming and transmissions plus the limited range due to small output power and the diminutive antenna size.

It's best to consult our transmission guide when it becomes available (stay tuned to this blogger) and be ready to tune into a broadcast. Increasing the length of your radio's antenna will help and some radios will have greater sensitivity. This will increase the chances of hearing a broadcast and getting a QSL card.

Note, one cannot consult the blog and simply report the posting after the transmission. Our logs posted will detail the times of broadcast but not list the content. So to verify reception, listing the program's name or content will be important. To qualify, a report must fit the period of time after the broadcast and before the broadcast content posting at the blogger.

Each issued QSL card will contain the radio station's unique response. If you want a printed card, in addition to the E-Card, on a Mac computer, select Print and follow the setup. The card is full regulation postcard size at 4x6-inches. Printing on glossy stock heavy weight bond photo paper is recommended.

FM Radio Station Power Monitor Part 13

Radio switch schematic

FM RADIO STATION POWER MONITOR PART 13

Follow the schematic diagram to wire in a power switch and a red LED power-on monitor light.

Guide

The switch turns the radio radio station transmitter on and off. When on, the red LED will remain lit. The LED monitor light does not interfere with the radio station transmitter. This is the first modification add-on to the radio station.

Parts required, 1 LED, 1 resistor, 1 SPST or SPDT (for a future add on) toggle switch. Use the LED wiring guide pictorial and schematic to determine proper LED polarity.

Testing the LED power on/off indicator circuit. The resistor value of 820 ohms was determined with the use of a resistor ohm substitution box.

The guide shows a "looking down view" from above the LED. Shown in the schematic is a SPST switch. The actual radio transmitter will have a SPDT switch.

The 3mm red LED costs NT$1 each (US$.033 each) in a package of 100. The SPDT toggle switch SW1 is priced at NT$18 (US$.60). The resistor R1 is 820 ohm or the next larger resistance.

http://humanoidolabs.blogspot.tw/2013/12/fm-radio-station-controls.html

FM Radio Station Part 5 Index
http://humanoidolabs.blogspot.tw/2013/12/fm-radio-station-part-5-index.html 

FM Radio Station Power Part 12

FM RADIO STATION POWER PART 12

Online mW to W Converter
http://www.rapidtables.com/convert/power/mW_to_Watt.htm

The FM radio station at 100 mW is only .1 watt which is a mere whisper of more powerful radio stations. (1 Watt = 1000 mW)

Relative Power
Measuring the voltage at the antenna can determine the relative power measurement which is useful for tuning, i.e. to a minimal or maximum value. 

Measuring Power
http://www.zen22142.zen.co.uk/Circuits/Testgear/rfprobe.htm

http://preciserf.com/wp-content/uploads/2012/04/Appnote-4-Power-tests1.pdf 

From Code of Federal Regulations Telecommunications 47
Part 80 to End, FCC 80.259
"(c) A reserve transmitter must be equipped to measure antenna current. (d) The antenna power must be determined at the operating carrier frequency by the product of the antenna resistance and the square of the average antenna current both measured at the same point in the antenna circuit at approximately ground potential."

How to Measure Amps or Watts With a Multimeter
Measuring Amps
Step 1: Select the "Current" setting on the main dial of the multimeter. Choose a current range high enough for the circuit being tested. For example, if the circuit has a current that you estimate to be around five amps, select the "10 amp" setting instead of the "1 amp" option. Choosing a setting that is too low can overload the multimeter.

Step 2: Insert the leads into the multimeter connections labeled "current." Typically, the black lead should be connected to the "common" port, while the red lead is connected to a port that matches the selected current range. This arrangement varies, depending on the unit. Consult the multimeter labels carefully to confirm that the configuration is correct for measuring current.

Step 3: Place the multimeter leads into the circuit using a series configuration. The electricity must be redirected to flow completely through the multimeter to obtain an accurate reading. Current should usually move into the red lead and exit the black lead.

Step 4: Read the amount of amperage displayed on the multimeter. Remember to consider this number in the context of the selected current range. For example, the number "10.00" may indicate 10 amps on one setting but only 0.01 amps if the multimeter is set to the smaller "milliamps" range.

Measuring Watts
Step 1: Choose the "Voltage" setting on the multimeter dial. As you did when measuring the current, ensure that the appropriate voltage range is selected. It is usually a good idea to select the highest possible voltage range to prevent an overload.

Step 2: Configure the multimeter leads into the ports marked for "voltage." The black lead can usually remain in the "common" position. Move the red lead to the port labeled for the voltage range being tested.

Step 3: Connect the leads to the circuit in a parallel arrangement. The black lead should link to a negative or grounded point, while the red lead should be touched to a point of the circuit you wish to measure. Unlike a current measurement, a voltage test does not need to be completely redirected through the multimeter.

Step 4: Read the number on the multimeter display. As with current, remember to consider the context of the multimeter range setting.

Step 5: Multiply the amount of current and the amount of voltage in a circuit to determine the watts. For example, a motor circuit that uses 5 amps and 12 volts has 60 watts of power.

A SIMPLE POWER DETERMINATION
Use several incrementing known wattage light bulbs as a test to verify basic power operation of the transmitter. The lamp will present a load to the transmitter that's similar to an antenna. This test may provide a visual indication of the power output from the transmitter, and verify operation of the antenna coupler. Use grain of wheat bulbs for milliwatt ratings.

POWER FORMULA
P=EI, P=(I^2)R where E is voltage in volts and I is current in amps

ANTENNA
The antenna is a small circular loop with a 1.75-inch diameter. It's measurement of resistance for the tiny loop antenna is 0 ohms on every scale from 2K to 20M. The multi-strand antenna wire is a total of 6-inches long. This indicates that power output readings and measurements can be made at the antenna coupler with no antenna needed. The coupler is where the antenna attaches to the board.

The next step is to unravel a length of wire equal to a fundamental size of the wavelength and measure its resistance. If the value is still 0, increase the fundamental, from 1/32th wavelength to 1/16th, then repeat again if the wire still has zero resistance. At 1/8th, the antenna may be too long.

FM Radio Station Part 5 Index
http://humanoidolabs.blogspot.tw/2013/12/fm-radio-station-part-5-index.html

OT Telescope Controls

Control room - this scene envisions a large enough OT Telescope control room designed to handle all the functions of the previous 14 extreme machine telescopes. The room would need space to include the Big Brain supercomputer and all of its components and supporting divisions. Multiple panels of LCD monitors could show observational OT Telescope views in 14 dynamics. To the left is the containment for the supercomputer.

OT TELESCOPE CONTROLS
OT is the most powerful telescope in the series of extremely powerful telescopes. Representing over the top performance, it includes the functions and capabilities of the previous 14 telescopes.

What is recommended for the telescope systems control panels and instrumentation environment? Perhaps a view from fiction can help envision the dream environment for control of the most powerful telescope, the OT, when it comes into full operation upon completion of assembly with pipe fittings and mountings.

Envisioning star field and particle dynamics analysis - here the telescope operator is selecting the type of field dynamics and adjusting the penetrative depth of sensing and imaging.

One aspect of the new OT telescope is about how to control it and develop instruments and control panels for it. The Promethius photos best illustrate some of the envisioned concepts.

Envisioning global planetary systems and minor objects, including moons, analysis controls and panels

Imagine a singular room, control center, instrumentation array that includes everything needed for controlling powerful functions inclusive of apertures, adjunctives, paradigmics, gravatomics, moleculars, interpolatives, extrapolatives, recyclers, extensions, inferences, gtechs, and power dynamics, all in a single telescope!

Envisioning automatic planetary atmospheric climatology analysis

The power reconfigurable OT is the ultimate extreme machine, powered by a supercomputer, with more reconfigurable functions than any other extreme machine built to date by the Lab. The extreme machine OT is the most powerful observatory telescope ever conceived by Humanoido Laboratories.

Envisioning multi analysis of a singular object suspended in the space time continuum. This type of instrumentation analysis and controls work to analyze and image distant galaxies, global star fields, and space objects from here to infinity. In particular the analysis of dynamics is selectable and multiple results display simultaneously.

LINKS
http://humanoidolabs.blogspot.tw/2013/12/extremely-powerful-telescopes-update.html

Credit: Prometheus

OT Over the Top Telescope

OT OVER THE TOP TELESCOPE
If it can be pulled off, the new generation, world changing, OT Over The Top Telescope will have the functions of all previous telescopes combined from the extremely powerful telescope series. This extreme machine would include the telescopes in the list presented below.

The development of science has learned from mistakes made by the computer development era when industry standards were not built in, even from model to model under the same roof of the same manufacturing company. The development of telescopes and machines at Humanoido Laboratories were designed and made compatible with each other. Now at the crossroads of a new overlord machine, the standardization of innovation with combining all technologies is now possible and viable in a very efficient manner.

We designed each telescope to be plug in compatible with the previous, and ones which were initially not compatible were upgraded for compatibility, making the entire line of all 15 telescopes compatible. Compatibility in the Lab and field is referred to as "pipe fitting."

Tools, parts, and add on machines are also compatible, including the set of Monster Machines, controls, boiler face plates, parts and other pipe fittings. Therefore, the OT Over Top telescope can handle the functions of the previous 14 telescopes. Of course, functions will be added to the OT one at a time, and a name change may be incurred as OT is currently a development name.

over the top
1. having gained more than one's goal
2. Bold; beyond normal, expected limits
EXTREMELY POWERFUL TELESCOPES
AN ARRAY OF EXTREME MACHINES
and introductory blog dates 

Followed by upgrades, the ULT and NULT ended up being renamed and this resulted in blogs with out-of-sync chronology. The ULT was the first extreme power telescope and extreme machine, followed by the even more powerful NULT.


1) ULT - Ultra Large Telescope - March 2012
http://humanoidolabs.blogspot.com/2012/03/nult-new-ultra-large-telescope-home.html
 
2) NULT - New Ultra Large Telescope - February 2012
http://humanoidolabs.blogspot.com/2012/02/new-ultra-large-telescope-nult.html
 
3) GT - Genius Telescope - June 2012
http://humanoidolabs.blogspot.com/2012/06/gt-genius-telescope.html
 
4) PGT - Paradigmic Genius Telescope - September 2012
http://humanoidolabs.blogspot.com/2012/09/paradigmic-gt-telescope.html
 
5) MGT - Molecular Genius Telescope - October 2012
http://humanoidolabs.blogspot.tw/2012/10/big-brains-new-paradigmic-molecular.html
 
6) PGT-ET - Paradigmic Genius Telescope - March 2013
http://humanoidolabs.blogspot.com/2013/03/pgt-telescope-new-look.html
 
7) PDT - Power Dynamic Telescope - April 2013
http://humanoidolabs.blogspot.com/2013/04/new-telescope-announcement.html
 
8) GGT - Gargantuan Gravatomic Telescope - May 2013
http://humanoidolabs.blogspot.tw/2013/05/next-telescope.html
 
9) SRT - Space Recycler Telescope - May 2013
http://humanoidolabs.blogspot.tw/2013/05/novel-space-junk-telescope.html

10) MMT - Molecular Mining Telescope - May 2013
http://humanoidolabs.blogspot.tw/2013/05/mgt-molecular-cradle-of-stars.html 

11) IET - Inference Engine Telescope - May 2013
http://humanoidolabs.blogspot.tw/2013/05/iet-interference-engine-telescope-first.html

12) M3T - Massive Molecular Mining Telescope - November 2013
http://humanoidolabs.blogspot.tw/2013/11/m3t-telescope-first-light-saturn.html

13) ET - Extrapolation Telescope - December 2013
http://humanoidolabs.blogspot.tw/2013/12/et-telescope.html

14) IT - Interpolation Telescope - December 2013 
http://humanoidolabs.blogspot.tw/2013/12/it-interpolation-telescope.html

15) OT - Over the Top Telescope - December 2013
http://humanoidolabs.blogspot.tw/2013/12/ott-over-top-telescope.html 

MACHINES COMPATIBLE WITH TELESCOPES
Extreme machines include Gravatomic, Molecular, Inference, and Alternate Reality etc. The AAR Machine of May 2013 can see alternate realities. The Gravatomic Machine was pipe fit onto the GGT Telescope to see objects in gravatomic constructs. The Molecular Machine was fit on the MMT to see objects in molecular transformations. The Inference Engine was developed for elements of idea, creativity, vision, innovation, reasoning, interpolation, extrapolation, and running experiments to explore the sixth dimensional element of Imagination Power. In June of 2013, the Procedural Machine was constructed.

Monster Machines
http://humanoidolabs.blogspot.tw/2013/06/monster-machines.html

Monster Machine Era
http://humanoidolabs.blogspot.tw/2013/06/new-machine-era.html

Lab Machine Evolution
http://humanoidolabs.blogspot.tw/2013/06/lab-machine-evolution.html

Machine Variety
http://humanoidolabs.blogspot.tw/2013/05/machine-variety.html

Monster Combo Machine
http://humanoidolabs.blogspot.tw/2013/06/monster-machine-combo.html
Monster Combo Machine Anomalous Switch
Extremely Powerful Telescopes Update (Historical)
GGT - Gargantuan Gravatomic Telescope
SRT - Space Recycler Telescope
MMT - Molecular Mining Telescope
IET - Inference Engine Telescope  

Pipe Fitting References
http://humanoidolabs.blogspot.tw/2013/06/monster-machines.html

http://humanoidolabs.blogspot.tw/2013/05/extremely-powerful-telescopes-update.html

http://humanoidolabs.blogspot.tw/2013/05/aar-altercated-alternated-reality.html
http://humanoidolabs.blogspot.tw/2013/05/mgt-molecular-cradle-of-stars.html

http://humanoidolabs.blogspot.tw/2013/12/molecular-mining-era.html

http://humanoidolabs.blogspot.tw/2013/05/advanced-control-panel.html

http://humanoidolabs.blogspot.tw/2012/10/big-brains-new-paradigmic-molecular.html

http://humanoidolabs.blogspot.tw/2013/05/telescope-arsenal.html

http://humanoidolabs.blogspot.tw/2012/10/molecular-stage-cascader.html

Huge Space Egg - What will it Hatch?

HUGE SPACE EGG DISCOVERED!
WHAT WILL IT HATCH?
THIS GIANT SPACE EGG IS SURE TO HATCH SOMETHING!!!

We've found a place where eggs grow in deep space and time. These are actual space eggs, composed of space and time, and some kind of molecular particle plasma, stuck to the gravity well of a singularity, multiplying and growing to enormous proportions! The space eggs appear to have many of the features of a typical earthly bird egg as shown in the diagram below.

What are giant energy eggs doing in space? The egg is actually a space time particulate egg, undergoing some unknown growing transformation in a suspension of temporal fluid time and space. What is it giving birth to? What strange anomalous creature or thing may emerge from its shell? One hypothesis is the egg is a birthing particulate aggregate of a new place in space time.

The discovery is not too surprising given the twelve extremely powerful telescopes located far out in space, with the grand M3T telescope recently operational being on the most powerful. These vast in size telescopes not only see farther and in new filtered dimensional light, they are capable of capturing new realms, such as gravatomics, moleculars and inferences.

This space egg even has a round germination disc on the right, and development striated materials feeding the Vitelline. Unfortunately the egg is temporal due to the Singularity, existing outside of our time frame and undergoing intense gravitational influences putting it in a flux state relative to our positional time line. The outcome, or birthing event, may not happen for another billion years. Will the temporal outcome speed up or slow down? More study may answer this question.

One new telescope under consideration that may help answer this questions is the Power Extrapolation Telescope or ET. ET can take a number of observations made at significantly different time periods and upon examining the materials, parameters, and changes, construct an extrapolated future view. The objective is to accomplish this in real time on the fly through the telescope. This could in theory speed up the evo of an observed object.

ET could observe the egg and extrapolate a new view closer to the point of birth.

The big question is what will this huge space egg hatch and exactly how can space and time do the incubation? Could it birth a new kind of space creature, a new kind of space, or some very strange living anomaly of inexplicable nature? Whatever pops out of this big space egg, it's sure to be strange! 

Brain Cortex Wire Sump Part 48

Remove the clothes pin and push the wires down into the square space known as the power sump. These strand wires have enough flexibility for installing and removing batteries.

BRAIN CORTEX WIRE SUMP PART 48
DEEP DOWN IN THE SUMP INTESTINAL SPACE OF THE BRAIN CORTEX, AT THE LOWEST DUNGEON PORTION OF THE JAR, IS SOMETHING IMPORTANT!

In this important brain assembly step, all wiring thus far is moved to within the power unit sump. The power unit sump is the empty space directly in front of each battery. It's a large square hole with three purposes, 1 ) to offer enough space to insert and remove batteries, 2) serve as a space to hold wiring, and 3) to clear the space on top of the battery holders for mounting the circuit boards. Wiring placed in this position is flexible enough when removing and installing batteries, and is moved out of the way for mounting the brain boards. Try to matte down the wiring to the jar floor.

Index to the Brain Cortex
http://humanoidolabs.blogspot.tw/2013/11/brain-cortex-index-part-16.html

Brain Cortex Power Wiring Part 45

BRAIN CORTEX POWER WIRING PART 45
ELECTRIC JUICE  It's time to attack the brain cortex wiring and complete this phase of the project. Let's get some electric juice going! The jar is home to the brain cortex. Every home needs electrical wiring and the brain's jar is no different. The electric juice will power the brain, lighting, speaker, and sensors.

Wire each twin power unit like this

The next step is wiring the power unit. In this procedure, the battery holders are removed and the ends (+ and -) black and red wires are connected together with yellow twists. Be consistent by connecting the wires on the right sides of the twin holders.

Snap in a size D battery into each battery holder.

Insert batteries outside of the jar

Initially we're using Zinc Carbon batteries (Philips LongLife R20).

Now cut four black wires and four green wires, each 5-inches long, and strip the ends. Connect these with yellow twists to the left side wires on the battery holders. Attach a small piece of Scotch tape to insulate

Taped ends prevents shorts

one end of each wire to prevent a short during the installation.

Measure the voltage of each twin power unit. Remember, a twin power unit equals two batteries and two battery holders connected together in series to obtain 3 volts. (The voltage of new batteries not under load

Finished wiring - test shows 3.13 volts

will be slightly higher than 3 volts.)

Reinstall all battery holders, remembering their correct positions to fit into the jar holes.

Gather up all the green wires, insert one 5" length of green solid wire, and twist the ends together with the  yellow twist. Repeat for the red wires. The two lengths of solid wire will connect to the solderless breadboard. Use a plastic clothes pin to hold all the ends together. Test again for voltage. In the test, the meter shows 3.13 volts for new Zinc-Carbon D cell batteries connected together. Note: during this procedure, the Solar Panel red and black wires are left floating. These may connect later to the solderless breadboard.

The Chinese yellow wire twists are sold in Taiwan, in a package of 20 for NT$20 obtained from the dollar store. The brand is manufactured under authority of Sellery Inc. California USA, and the DIY item number is TE-18. http://www.sellerytools.com  886-2-26103915

Note: The battery holders each have a red and black connection wire. Supply a 5-inch length of wire and connect it to the lowest wire nearest to the jar floor. This enables it to reach the top where similar colored wires connect together. 

Index to the Brain Cortex
http://humanoidolabs.blogspot.tw/2013/11/brain-cortex-index-part-16.html 

Brain Cortex Power Mounts Part 42

CORTEX BRAIN POWER MOUNTS PART 42
THE BRAIN IS POWER HUNGRY
The brain cortex in a jar power mounts consist of eight battery holders mounted directly on the inside jar. The mounts are four hardware assemblies to a single battery holder and include a half inch spacer, nut, bolt and three sealing washers to each. Thus far, the single battery holders are stacked twins. The jar has four geometrically mounted twins.

The 32 holes in the transparent polymer jar are not drilled but rather made with a hot soldering iron to do the melting. This is the best approach considered as hot glue would damage the jar, a mechanical drill is prone to scratching the jar, there's no easy method of scoring the surface for drilling, and a punch can easily tear the substrate.

Each assembled power unit is held in position inside the jar and from the outside, a hot soldering iron melts a tiny dot over the spacer end. The power unit is removed and the four holes are melted into the jar. Then, the power unit is mounted on the jar and process is repeated for seven others. (see illustration)

JAR CAVEAT
Be careful when handing the jar so as not to scratch the surface. As the jar is made of soft flexible plastic, it can easily scratch. 

BRAIN CORTEX INDEX
http://humanoidolabs.blogspot.tw/2013/11/brain-cortex-index-part-16.html