Tuesday, October 23, 2012

Quadlyzer Quantum Analyzer


Big Brain Project @ Humanoido Labs
THE QUADLYZER FUN MACHINE
BASIC Stamp Cluster Reflective Quantum Analyzer

Inside the QuadLyzer: a Reflective Quantum Analyzer (Humanoido)



4 Deterministic Parallel Clustered Cores with LCD Display,  Enumerators, Speakers, LEDs, 8-Bit Parallel and 4-Bit Micro I/O Interfaces
Full schematic to build a QuadLyzer Quantum Analyzer Fun Machine (Humanoido)
QUICK INTRO
THE QUADLYZER is a machine that can reflect representative states of the Quantum World. It accomplishes this inside four processors representing at least four space dimensions. These are held as algorithmic states and parameters located inside multiple networked clustered parallel processors. Like the example of two real world mirrors of reflective dimension facing each other which represent infinity reflections, the QuadLyzer too can reflect more dimensions from baseline to infinity and states in between.

Check back frequently and watch this project grow as we continue to add fantastic new information. If you've never used Stamp processors, now is the time to learn the basics. If you have Stamps on hand, put the processors to full use in new and interesting ways, and learn new stuff!

The Parallel Clustered QuadLyzer
http://humanoidolabs.blogspot.com
www.parallax.com  Big Brain Project
Project by Humanoido
Indexed Wed. Oct. 24th, 2012 v1.0


QuadLyzer version with EXOskeleton footprint ready for wiring (Humanoido)

Specifications
Name - QuadLyzer
Purpose - Explore/Simulate Reflective Quantum States
Number of Processors: Four BS2 Networked Processors

Connection: Networked Parallel Cluster
Total LEDs - 8 (4 Board Activity LEDs + 4 I/O LEDs)
Piezo Speakers - 4
Number of Boards - 4
SW Loading - x4 USB Hub Loading
Type of Boards - BASIC Stamp Homework Board
Total IO Pins (4 x 16 + 2 Dedicated Serial = 56 + 8 Dedicated Serial)
Enumeration - 4 RC Indices
Deterministic Cores - 4
Communications Interface - 1 Wire serial (Party Line)
CPU Operations - Full Deterministic Parallel
Parallel Bus Upgrade - 8-bit and 3-bit (4-Bit in newer versions)
Processing Speed - (4 x 20 MHz = 80 MHz)
Program Execution Speed (4 x 4,000 IPS = 16,000 IPS)
RAM Size (4 x 32 Bytes = 128 Bytes)
EEPROM (4 x 2K = 8K)
PBASIC Instructions (4 x ~500 = ~ 20,000 instructions)
PBASIC Commands - 42
Communications - up to 9,600 BAUD x 4 = 38,400 with 4 lines
Output Devices - LEDs, Speakers, Pins, Computer Terminal Debugger
Source/Sink Current per each IO - 20 to 25 ma
Source/Sink Current per each Stamp - 40 to 50 ma per 8 pins
Power - Four 9-volt batteries or by bench power supply
Programming - Each board programs with a USB Mini-B connector with built-in RS-232 serial converter
Reset - Four individual resets
SW Type - Evolving Core AI

Operating System - QuadLyzer OS or Q-OS
Examples of Base Cost - boards, 4 x $39.99 = $139.96 or OEM kits, 4 x $29.99 = $119.96 or BS2 SSOP 4 x 10.99 = $43.96


LCD data for printout
NOTE ABOUT VERSIONS
Rapid development has created 4 versions of the QuadLyzer. V1 was built as a stacked tower cluster and shelved due to excessive size. V2 was built with a multi-sided Exoskeleton made from HomeWork boards and was quickly adopted as the standard. V3 has an added 3-bit port. V4 has a 4-bit port in place of the 3-bit port. V4 puts the LCD Green Screen on P0 while the previous versions have it connected to dedicated p12. BOARD VERSIONS Note there are many different versions of the Parallax BASIC Stamp HomeWork board. This project is using the version without a power switch (Revision E) which is (c)2002-2007.

LCD DISPLAY
Links
Parallax Serial LCD Docs v3.0 (.pdf)
Propeller Example Code (.zip)
Javelin Stamp Example Code (.zip)
BASIC Stamp 1 and 2 Example Codes, Rev F (.zip)
Javelin Stamp Example Code (.zip)
SX/B Serial LCD Demo (.SXB)
Smart Sensors and Applications Parts & Text


http://www.parallax.com/Store/Accessories/Displays/tabid/159/ProductID/51/List/0/Default.aspx?SortField=ProductName,ProductName

This display provides basic text wrapping. You have control to move the cursor anywhere on the display with a single instruction and turn the display on and off in any configuration. It directly supports ASCII Dec 32-127, the same visible characters as the BASIC Stamp Editor's Debug Terminal. In addition, you may define up to eight of your own custom characters to display anywhere on the LCD. This device can be connected to a PC serial port using a MAX232 line driver.

Features
Clear 4x20 character display
Turn backlighting on or off with a single command
Directly supports ASCII DEC characters 32-127
Eight user-defineable custom characters
Move the cursor anywhere on the display with a single command
Baud mode selector and adjustable contrast on the back of the display

Application Ideas: Professional-looking text user interface on any microcontroller application
Easy serial debugging without a PC Real-time sensor data output on autonomous robots
Key Specifications: Power requirements: +5 VDC, 20 mA (light off), 80 mA (light on) Selectable asynchronous serial baud rates: 2400, 9600, 19200
Dimensions: Approx. 2.4 x 3.9 in (60 x 100 mm)
Operating temp range: -4 to +158 °F (-20 to +70°C)
http://www.diybin.com/products/Parallax-4x20-Serial-LCD-Backlit.html

Board Power Switching
To compensate for the lack of a power switch on the boards, a parallel power harness is created from connected 9-Volt battery connectors which are led to a Lab Bench Power Supply which has control over the on/off power setting. For battery operations, batteries are clipped onto the board with one side (or terminal) for off, and two sides for on.
 
Introduction & Background
"I’ve had this idea for a machine that can reflect the state results of “computer programs” back and forth inside cores like reflection mirrors to gain effects for algorithmic simulated quantum states." As we know, in the physical world if mirrors are positioned properly, a running object infinity situation can result. We’ve all seen this with two mirrors placed facing each other. Now consider the reflective dynamics of four dimensional mirrors. By offsetting space, the numeric reflective states will vary. A “reflection tuner” can optimize or de-optimize results. The virtualized experimental tuner idea is for a larger super machine concept that could more comprehensively simulate the effects of quantum mechanics. The presentation here will cover the hardware, electrical and offer an intro to starter SW. More advanced information about Reflective Quantum States may appear at this blog as developed and as time permits.


Schematic for 1 HomeWork Board. QuadLyzer uses four boards. (Parallax)
Name Convention
The final name QuadLyzer comes from Quad, meaning four processors, and Lyzer which is derived from the word Analyzer. The first development name was Quadrinator.

One board pictorial (Parallax)
Parallax, Inc. BASIC Stamp HomeWork Board ver 1.1
 A. BASIC Stamp 2 Module. The BASIC Stamp is comprised of several components: PIC16C57- 20/SS - a Microchip 2K 8-bit microcontroller programmed with the the BASIC Stamp “Interpreter” that runs the Parallax BASIC Stamp code like a mini operating system; the 24LC16B EEPROM - a Microchip 2K EEPROM (electrically erasable programmable read-only memory) with a user-modifiable read- only memory (ROM) that can be reprogrammed with your BASIC Stamp code; a 20 mHz resonator to provide an accurate clock source for the BASIC Stamp; 220 Ohm resistors across the I/O pins to provide current protection for mistake wiring; an LM2936 voltage regulator which provides 50 mA for the BASIC Stamp and your circuits powered from the breadboard’s Vdd connection. B. DB-9 Female. The DB-9 port connects via serial cable to your PC’s serial port. This port is used to download programs to your BASIC Stamp and for the BASIC Stamp to send data back to the PC. C. Power and Ground Connections. Vdd is regulated 5V, Vin is 9V from the transistor battery, Vss is ground. D. Breadboard. Two areas of 5 column x 17 row breadboard project area. Connections are horizontal separated by the trough. E. Power Button. Illuminated when the BASIC Stamp is running a program only. F. Reset Circuit. Reset the BASIC Stamp by pressing this button. G. Battery Tie-Downs. If using the HomeWork Board Through-Hole Version for projects involving high- vibration (on R/C airplanes, robots, etc.) a “zip-tie” can hold the battery firmly to the board if looped through these holes. H. Power Supply. Accepts a 9V battery.

CHECK YOUR BOARD REVISION
Revision E has no power switch. A large power regulator is located above the BS2 circuit.                                          

Method
A four-board parallel BS2 stamp machine is designed and built to introduce and explore new concepts of reflective programming RP. The goal is to introduce the QuadLyzer machine for use by experimenters, hobbyists and academia. Stamps have the processing power and full speed potential required for creating PBASIC program simulations of various exampling “reflections” for this project. Additionally, the ease of programming in PBASIC is a plus, making the Stamp a “best choice” in the creation and exploration of rapid protos.
 

Unfinished QuadLyzer Tower
Processor Choice
I use both Propeller chips and BASIC Stamps. As a matter of fact, some projects for the Propeller chip are being moved back to the BASIC Stamp. It has happened with the QuadLyzer - some things developed in 5 minutes on the BASIC Stamp takes 5 days on the Propeller. This is in part, due to the great availability of documentation and resources for the Stamp and PBASIC programming language. When the Stamp has high performance within the range of timing and function suited for the app, and rapid development time is a factor, it becomes the usable choice. When the app fits, the cost of a Stamp over a Propeller is equated to shorter development time.

QuadLyzer Tower
The QuadLyzer Tower was very tall. With the LCD mounted at the top, it reached over 15-inches high, not counting the LCD size. This version was built and then discontinued for the smaller footprint design Exoskeleton, which forms a smaller "near cubed size" machine. Lab machines are often portable and the form factor is important.

Print ad for shipping a QuadLyzer
News Alert
Just in, the Exo form factor QuadLyzer is described as looking like a bomb! For transportation, please include the original Parallax Advertising (see photo for printing) or a printout of the BASIC Stamp Homework Board, the LCD and any attached peripherals. Secondly, the best option is the quick disconnect feature. Unbolt two angle brackets from one side of each board. This involves the removal of eight bolts.

CONSTRUCTION
Parts of the QuadLyzer
The machine consists of seven main parts. a) First, four microprocessors are networked together on a serial party line. b) Next, the parallel 8-bit bus is available in two 4-bit line sections to communicate each in parallel. c) The enumerator establishes a unique ID for each processor. The output consists of d) audio  e) LED and f) 4x20 Serial LCD. g) The 3-bit micro bus for I/O has a truth table for coding. 

The EXOskeleton Form Factor
Four Parallax BASIC Stamp HomeWork Boards are connect together in EXOskeleton fashion. This is a smaller footprint compared to a stacked tower, permitting easy access to wiring with no obstructions. It permits mounting the display in a paramount location. It also opens up more space in the center of the machine for experiments, wiring and expansion. Place the boards, with solderless breadboards facing up and to the outside so the long length is orientated up and down and connect together with angle brackets and hardware.

Details for the newer HomeWork Board from Parallax
Stacking Tower Cluster
Four Parallax BASIC Stamp HomeWork Boards are connect together by stacking to create a parallel tower, clustered together in a network. These are held together with brass spacers and hardware. The spacing between boards is great enough to facilitate easy wiring. The tower option has a very large footprint as seen in the photos and is unsuitable for efficiency in portability and transport. However, the protection of one board over the other offers wiring protection. In this machine, portability is paramount, indicating a choice of the EXO design, although both versions are built for study and experiments.

LED & Switch wiring (Parallax)
Preparing Enumeration Pins 
Each computer has one RC circuit on pin 13, prepared in advance. * is a 220 ohm resistor built into each Stamp Project Board.Software scaling is set to 54. The program must go pin low and pause 2000 for repeat reliable readings.

'               *
'              220
' pin 13 <-----^^^^^----- no circuit, open       COMPUTER 1 ID = 00
'             resistor
'
'               *        R2       C2
'              220       1K       .1uf
' pin 13 <-----^^^^^-----^^^^^-----||----- Vss   COMPUTER 2 ID = 17
'            resistor  resistor  capacitor       brown-black-red
'
'
'               *        R3       C3
'              220       2K       .1uf
' pin 13 <-----^^^^^-----^^^^^-----||----- Vss   COMPUTER 3 ID = 28
'            resistor  resistor  capacitor       red-black-red

'
'
'               *        R3       C3
'              220       3K       .1uf
' pin 13 <-----^^^^^-----^^^^^-----||----- Vss   SUGGESTED COMPUTER 4 ID = XX
'            resistor  resistor  capacitor       orange-black-red


Schematic diagrams for RC circuits on four boards


Note, four BS2 boards used already have the 220 ohm resistor built in, same as the BS1 boards. BS2 has a similar RC command like the BS1. Scaling may vary. The parallel QuadLyzer will require an additional circuit (added above) for computer 4 ID. Try a 3K resistor.

Here are the pseudo-code steps the program goes through to take the RC-time measurement:
Declare the variable time to store a time measurement. 

Code block within DO...LOOP:

o    Set I/O pin P7 to HIGH

o    Wait 100 ms,20 ms charges capacitor, 80ms keeps Debug
      Terminal display steady
o    Execute the RCTIME command
o    Store the time measurement in the time variable
o    Display the value time in the Debug Terminal

Before the RCTIME command is executed, the capacitor is fully charged. As soon as the RCTIME command executes, the BASIC Stamp changes the I/O pin from an output to an input. The RCTIME command is a high speed version of polling that measures the amount of time it takes for the capacitor to lose its charge and fall below the I/O pin’s 1.4 V input threshold. Instead of counting in 100 ms increments, the RCTIME command counts in 2 μs increments.


Parts List
BS1-4 BS2 Board
Ra-d  0,1,2,3K Ohm
S1    Speaker (x4)
DIS   Serial LCD Display
D1    LEDs (x4)
R1-3  1K Ohm Resister (x4)
C1-3  .1uf Capacitor


Pins Per Board
Each processor has 16 pins. Pinout for each board is as follows:

P00 - Party Line
P01 thru P08 - Parallel
8 bit Bus*
P09 thru P11 - 3 Bit Micro Bus I/O
P12 - Serial LCD 4x20 Display
P13 - Unique Repeatable Enumerator
P14 - LED
P15 - Speaker


Version 2
 
P00 - Party Line, Serial LCD 4x20 Display
P01 thru P08 - Split Parallel 8 bit Bus
P09 thru P12 - 4 Bit Micro Bus I/O
P13 - Unique Repeatable Enumerator
P14 - LED
P15 - Speaker


BIG SOFTWARE SECTION
PROGRAMMING THE QUADLYZER

Method of Primary Reflection
The QuadLyzer has four processors running at the same time. Any one processor can become the primary image. Where processors are ID’d as 1, 2, 3, and 4, the following truth table illustrates introductory primary reflections.

1 - 2,3,4
2 - 1,3,4
3 - 1,2,4
4 - 1,2,3


The following is a truth table for using the first established 3-Bit Micro Bus. A hardware Micro Bus is located on each board for controlling I/O.


3-Bit Micro Bus I/O
 
         P09 P10 P11
(01) A   x   x   x
(02) B   x   o   o
(03) C   x   o   x
(04) D   x   o   o

(05) E   o   o   o
(06) F   o   x   x
(07) G   o   o   x
(08) H   o   x   o

(09)  I   x   x   o

The upgraded Micro Bus is a new version with 4-Bit capacity. It's made possible by relocating the LCD Green Screen to pin 0, making another pin available for the Micro Bus. This increases the machine from 9 Micro Bus states to 16.

4-Bit Micro Bus I/O
 
         P09 P10 P11 P12
(01) A   x   o   o   o
(02) B   x   x   o   o
(03) C   x   x   x   o
(04) D   x   x   x   x
(05) E   o   x   x   x
(06) F   o   o   x   x
(07) G   o   o   o   x
(08) H   o   o   o   o

(09) I   x   o   x   o
(10) J   o   x   o   x
(11) K   x   o   o   x
(12) L   o   x   x   o
(13) M   o   x   o   o
(14) N   x   o   x   x
(15) O   x   x   o   x
(16) P   o   o   x   o

Programming variables - Parallax
QUADLYZER SOFTWARE BASICS

Chart of variable types for programming in PBASIC

The QuadLyzer machine has access to various peripheral devices that offer input and output with control over representations of quantum states. This includes LEDs, servos, LCD display, ultrasonic sensor, pushbuttons, accelerometer, time base reference chip, speakers, RC, and PWM Pulse Width Modulation. This section will include various starter code samples to facilitate programming and offer references for more future expansion and development projects.

QuadLyzer Peripherals & Devices for Programming
  • LEDs 
  • Servos
  • LCD display
  • Ultrasonic sensor
  • Pushbuttons
  • Accelerometer
  • Time Base Chip
  • Speakers
  • RC Circuit
  • PWM Pulse Width Modulation
STAMP TEST
'STAMP TEST DEBUG SOFTWARE
'{$STAMP BS2}
DEBUG "Hello World! "

DEBUG TEST
FOR counter = 20 to 120 STEP 10
DEBUG ? counter, CR
HIGH 14 

PAUSE 500 
LOW 14 
PAUSE 500
NEXT

DEBUG "All done!"

Data by Parallax
If the BASIC Stamp is being used in a project where at least some small amount of time is spent doing nothing you can put it in a low-power mode to extend battery life using the SLEEP command (Table 2). The duration which you put the BASIC Stamp to SLEEP is accurate to ± 1% at 75° F and can ranges from 2.3 seconds to 18 hours (you can “wake up” and go back to sleep after 18 hours). By comparison, the PAUSE command is simply a delay in a PBASIC program yet the BASIC Stamp continues to draw full operating current. See the BASIC Stamp Windows Editor on-line help for all the details on the SLEEP and PAUSE commands. (reference HomeWork Board Manual)

POWER CONSUMPTION CODE
With this example the Power LED remains on when the PAUSE command is executed. Current consumption remains at 10 mA.

' POWER DEMO - PAUSE.BS2
' Power LED without SLEEP command
' {$STA
MP BS2}
loopCounter    VAR    Byte  
' Variable definition
Start:                      
' Main Program
 FOR loopCounter = 0 to 99
DEBUG Home, "loopCounter =", dec loopCounter
NEXT
PAUSE 1000
GOTO Start


POWER SAVER CODE  
With the SLEEP example the Power LED turns off when the SLEEP command is being executed because the EEPROM is inactive. Current consumption is 10 mA while the loop is being executed but drops to 40 μA during the SLEEP command.

' POWER DEMO - SLEEP.BS2
' Power LED with SLEEP command
' {$STAMP BS2}
' Variable definition
loopCounter    VAR    Byte
' Main Program
Start:
FOR loopCounter = 0 to 99
DEBUG Home, "loopCounter =", dec loopCounter
NEXT
SLEEP 1
GOTO Start


Maybe putting a BASIC Stamp to SLEEP permanently only demonstrates that a 9V battery can last almost two years if you wake the BASIC Stamp once in a while. In reality, projects need to wake up and provide current to “loads” like LEDs and other chips used in your project. If you know the current draw of the individual components and how long they are activated you can make an educated guess at total current consumption and battery life. If you’re only visiting your North Pole weather station annually even a small battery can provide a long lifespan for the BASIC Stamp, not to mention larger batteries with more milliamp hours.

To clarify the BASIC Stamp’s different power consumption operating scenarios and their effects on battery life review the following two programs in conjunction with Table 2. Downloading and understanding these programs will require a look ahead to future chapters, so be prepared to re-visit this section.
Both programs have the same result. The BASIC Stamp will send numbers to the BASIC Stamp Windows Editor debug window and then go into a period of inactivity for a second. With the PAUSE example the power LED remains on because the EEPROM is still communicating with the BASIC Stamp interpreter chip, but with the SLEEP example the EEPROM is shut down and the power LED is off.


FLASH THE LED METHOD 1
' {$STAMP BS2}
' Program: LED Blink.BS2 

' Purpose: Blinks an LED connected to BASIC Stamp pin P15
' ---------------------------------------------------------------
Start: HIGH 14 ' turn LED on 

PAUSE 500      ' wait one-half second 
LOW 14         ' turn LED off 
PAUSE 500      ' wait one-half second 
GOTO Start     ' do it again 

LED FLASH METHOD 2 ' {$STAMP BS2}
' Program: LED Blink.BS2 (Version B)
' Purpose: Blinks an LED connected to the BASIC Stamp
' ---------------------------------------------------------------
LedPin    CON    15  ' LED control pin
' ---------------------------------------------------------------
Start:
HIGH LedPin          ' turn LED on
PAUSE 500            ' wait one-half second
LOW LedPin           ' turn LED off
PAUSE 500            ' wait one-half second
GOTO Start           ' do it again


LED FLASH METHOD 3
' {$STAMP BS2}
' Program: LED Blink.BS2 (Version C)
' Purpose: Blinks an LED connected to the BASIC Stamp
' ---------------------------------------------------------------
LedPin    VAR    Out15  ' LED on/off control
LedCtrl    VAR    Dir15 ' LED i/o pin control
On CON1
Off    CON 0
' ---------------------------------------------------------------
Initialize:
LedCtrl = %1            ' make LED pin an output
Start:
LedPin = On
PAUSE 500
LedPin = Off
PAUSE 500
GOTO Start


TWO LED TEST
' {$STAMP BS2}
' {$PBASIC 2.5}
DEBUG "Program Running!"
DO
HIGH 14
HIGH 15
PAUSE 500
LOW 14
LOW 15
PAUSE 500
LOOP


Parallax BS2 Push Button wiring
PUSHBUTTON TEST
The DO...LOOP in the program repeats every 1⁄4 second because of the command PAUSE 250.    Each time through the DO...LOOP, the command DEBUG ? IN3 sends the value of IN3 to the Debug Terminal. The value of IN3 is the state that I/O pin P3 senses at the instant the DEBUG command is executed.






READ PUSHBUTTON STATE
' Check and send pushbutton state to Debug Terminal every 1/4 second.
' {$STAMP BS2}
' {$PBASIC 2.5}
DO
DEBUG ? IN3
PAUSE 250
LOOP


PUSHBUTTON CHECK
' What's a Microcontroller - PushbuttonControlledLed.bs2 
' Check pushbutton state 10 times per second and blink LED when pressed.
' {$STAMP BS2} 

' {$PBASIC 2.5}
DO

DEBUG ? IN3
IF (IN3 = 1) THEN
HIGH 14
PAUSE 50
LOW 14
PAUSE 50
ELSE
PAUSE 100
ENDIF
LOOP


CODE COMMENTS FOR ABOVE
Do the commands between here and the Loop statement over and over again
Display the value of IN3 in the Debug Terminal

If the value of IN3 is 1, Then
  Turn the LED on

  Wait for 1/20 of a second
  Turn the LED off
  Wait for 1/20 of a second
Else, (if the value of IN3 is 0)

  do nothing, but wait for the same amount of time it would have
  taken to briefly flash the LED (1/10 of a second).

Loop

SERVO CODE EXAMPLE
' What's a Microcontroller - ServoTest.bs2
' Test the servo at three different position signals.
' {$STAMP BS2}
' {$PBASIC 2.5}
counter    VAR    Word
DEBUG "Counterclockwise 10 o'clock", CR
FOR counter = 1 TO 150
PULSOUT 14, 1000
PAUSE 20
NEXT
DEBUG "Clockwise 2 o'clock", CR
FOR counter = 1 TO 150
PULSOUT 14, 500
PAUSE 20
NEXT
DEBUG "Center 12 o'clock", CR
FOR counter = 1 TO 150
PULSOUT 14, 750
PAUSE 20
NEXT
DEBUG "All done."
END


RC TIME CODE
' Read resitor in RC-time circuit using RCTIME command
' {$STAMP BS2} 

' {$PBASIC 2.5}
time VAR Word 

DO
HIGH 13

PAUSE 100 
RCTIME 13, 1, time 
DEBUG HOME, "time = ", DEC5 time
LOOP


SOUND
'{$STAMP BS2}
'{$PBASIC 2.5}
duration    VAR    Word
frequency    VAR    Word
DEBUG "Alarm...", CR
PAUSE 100
FREQOUT 9, 500, 1500
PAUSE 500
FREQOUT 9, 500, 1500
PAUSE 500
FREQOUT 9, 500, 1500
PAUSE 500
FREQOUT 9, 500, 1500
PAUSE 500
DEBUG "Robot reply...", CR
PAUSE 100
FREQOUT 9, 100, 2800
FREQOUT 9, 200, 2400
FREQOUT 9, 140, 4200
FREQOUT 9, 30, 2000
PAUSE 500
DEBUG "Hyperspace...", CR
PAUSE 100
FOR duration = 15 TO 1 STEP 1
FOR frequency = 2000 TO 2500 STEP 20
FREQOUT 9, duration, frequency
NEXT
NEXT
DEBUG "Done", CR
END


How ActionTones.bs2 Works
The “Alarm” routine sounds like an alarm clock. This routine plays tones at a fixed frequency of 1.5 kHz for a duration of 0.5 s with a fixed delay between tones of 0.5 s. The “Robot reply” routine uses various frequencies for brief durations. The “Hyperspace” routine uses no delay, but it varies both the duration and frequency. By using FOR...NEXT loops to rapidly change the frequency and duration, you can get some interesting sound effects. When one FOR...NEXT loop executes inside another one, it is called a nested loop. Here is how the nested FOR...NEXT loop shown below works. The duration variable starts at 15, then the frequency loop takes over and sends frequencies of 2000, then 2020, then 2040, and so on, up through 2500 to the piezo speaker. When the frequency loop is finished, the duration loop has only repeated one of its 15 passes. So it subtracts one from the value of duration and repeats the frequency loop all over again.


FOR duration = 15 TO 1 

FOR frequency = 2000 TO 2500 STEP 15
FREQOUT 9, duration, frequency 

NEXT
NEXT


SOUND EFFECTS
' What's a Microcontroller - ActionTones.bs2
' Demonstrate how different combinations of pause, duration, and frequency
' can be used to make sound effects.
'{$STAMP BS2}
'{$PBASIC 2.5}
duration    VAR    Word
frequency    VAR    Word
DEBUG "Alarm...", CR
PAUSE 100
FREQOUT 9, 500, 1500
PAUSE 500
FREQOUT 9, 500, 1500
PAUSE 500
FREQOUT 9, 500, 1500
PAUSE 500
FREQOUT 9, 500, 1500
PAUSE 500
DEBUG "Robot reply...", CR
PAUSE 100
FREQOUT 9, 100, 2800

FREQOUT 9, 200, 2400
FREQOUT 9, 140, 4200
FREQOUT 9, 30, 2000
PAUSE 500
DEBUG "Hyperspace...", CR
PAUSE 100
FOR duration = 15 TO 1 STEP 1
FOR frequency = 2000 TO 2500 STEP 20
FREQOUT 9, duration, frequency
NEXT
NEXT
DEBUG "Done", CR
END


HYPERSPACE SOUND Here is just one modification to the “Hyperspace” routine:
DEBUG "Hyperspace jump...", CR 

FOR duration = 15 TO 1 STEP 3
  FOR frequency = 2000 TO 2500 STEP 15 

  FREQOUT 9, duration, frequency
  NEXT 

NEXT
FOR duration = 1 TO 36 STEP 3 

  FOR frequency = 2500 TO 2000 STEP 15
  FREQOUT 9, duration, frequency 

  NEXT
NEXT


MIXED TONES
' What's a Microcontroller - MixingTones.bs2
' Demonstrate some of the things that happen when you mix two tones.
'{$STAMP BS2}
'{$PBASIC 2.5}
DEBUG "Frequency = 2000", CR
FREQOUT 9, 4000, 2000
DEBUG "Frequency = 3000", CR
FREQOUT 9, 4000, 3000
DEBUG "Frequency = 2000 + 3000", CR
FREQOUT 9, 4000, 2000, 3000
DEBUG "Frequency = 2000 + 2001", CR

FREQOUT 9, 4000, 2000, 2001
DEBUG "Frequency = 2000 + 2002", CR
FREQOUT 9, 4000, 2000, 2002
DEBUG "Frequency = 2000 + 2003", CR
FREQOUT 9, 4000, 2000, 2003
DEBUG "Frequency = 2000 + 2005", CR
FREQOUT 9, 4000, 2000, 2005
DEBUG "Frequency = 2000 + 2010", CR
FREQOUT 9, 4000, 2000, 2010
DEBUG "Done", CR
END


How Long will the battery last?
According to Parallax, MilliAmp hours is a statistic measuring the amount of energy stored in a battery. For example, if you have a 1 mA-hr battery and a project drawing 0.5 milliamps, the battery will last for two hours. A typical 9V Duracell alkaline transistor battery provides about 565 milliAmp hours of energy.

LCD Code form from Savage Circuits
 LCD CODE FORM
http://www.parallax.com/tabid/797/Default.aspx
http://www.savagecircuits.com/forums/showthread.php?364-Parallax-4x20-LCD-layout-sheet

Now you can easily code rows and lines of characters on the Parallax 4x20 display using this form provided by electromange at Savage Circuits Forum. See Parallax 4x20 LCD layout sheet.
 
Assembly with Parallax 4x20 serial LCD
Photo: Machine QuadLyzer assembly with a 4x20 Parallax LCD, 90-degree angle brackets and simple hardware.

The cable is for connecting the serial LCD. The form factor is an exoskeleton made from four Parallax BASIC Stamp HomeWork Boards for a minimal footprint. These boards contain a BASIC Stamp 2 processor, believed to be one of the most documented hobby and educational processors in history.


Bar Graphs for LCD Displays from:
http://www.parallax.com/tabid/798/Default.aspx

Programs by Chris Savage. Simple and Advanced Bar Graphs on our LCD Display. These examples were designed to run with a Parallax Serial LCD Display.

BAR GRAPH [SIMPLE] (.BS2)
BAR GRAPH [RANDOM] (.BS2)
BAR GRAPH [ADVANCED] (.BS2)
BAR GRAPH [ADVANCED RANDOM] (.BS2) Going High-Resolution

The previous examples were for smaller values and could not handle word-sized data/variables. These versions support 16-bit values for higher resolution and use a different percentage calculation.


BAR GRAPH [HI-RES SIMPLE] (.BS2)
BAR GRAPH [HI-RES RANDOM] (.BS2)
BAR GRAPH [HI-RES ADVANCED] (.BS2)
BAR GRAPH [HI-RES RANDOM ADVANCED] (.BS2)


Indexing
Each stamp has its own unique enumeration which is generated by reading the RC constant created by the indexing of a unique resistor-capacitor combination wired into each Stamp circuit. There are four of these circuits with unique combinations. The R values for the Stamps are chosen to distribute readings across a wide range, so as not to overlap during comparisons of the initial readings from Stamp to Stamp.

Repeatability
With RC circuits, a scaled range is set up for repeatability. Whenever the machine boots, it establishes unique and “same” IDs for each stamp. Thus it can be programmed for accurate repeatability.

Assembly
For convenience, the machine is comprised of four BS2-based BASIC Stamp Homework Boards all wired in parallel with a common interface. Each board has the convenience of solderless breadboard real estate for circuit testing and expansion. Stamps are wired in parallel which enables the reflection of one by three others and in various combinations. The parallel stack cluster machine can run portable with 9-volt batteries or on the lab bench with a power supply. An LED is located one per board to indicate combinations of four reflective states.

Interface Bus & Communications
All four networked stamps are collectively strung on a one wire party line connected through four 220-ohm resistors. Each pin is connected to a 220 ohm series protection resistor. Communication is through software “rules of engagement” to prevent two or more stamps talking at the same time. All stamps can listen at the same time. Code uses the “TA Torch Algorithm” designed to pass the line of flow from one Stamp to another without conflict. Any one stamp can make Torch decisions based on the unique ID of the other Stamps.


Schematics
The QuadLyzer 1-wire Party Line
The 8-Bit Parallel Bus

Enumerator
Display
3-Bit Micro Bus (or new 4-Bit)
(LED & Speaker Output) 

Handling output
Output is by light (p14), sound (p15), terminal, or LCD (p12 on version 1 and p0 on version 2). Eight LEDS, four indicate board power status and four are connected to each pin 14 for programming. One piezoelectric speaker on pin 15. A 4x20 Green Screen serial one wire LCD on pin 12 or 0. Pins: a parallel eight-bit port consisting of two 4-bit ports (p1-P4 and P5-P8). A three or 4-bit port coded with a truth table (P9, P10, P11, and P12). In the new version, LCD routes to pin 0.

QuadLizer PBASIC Starter Software
1) RC Enumeration
2) Communications
3) LED Reflective Output
4) Debugger
5) Parallel Identifier
6) Piezo Speaker Annunciator

Acronyms Identified
RP - Reflective Programming
RC - Resistor-Capacitor Circuit
AM - Algorithm Machine
TA - Torch Algorithm
BSQ - Basic Stamp Quadrinator Machine


UPDATES
QuadLyzer SE
 A new version QuadLyzer is now introduced with an extended 4-Bit Bus. The 3-Bit Bus still exists on the previous machine. The new machine is designated as the QuadLyzer SE with a 4-Bit I/O Bus. Note, currently all versions have the split 8-Bit Parallel Bus. The port gain comes from interfacing the LCD directly to Party Line pin 0 so that it may listen in on conversations from all processors.

PROCESSOR EXPANSION
We're considering placing the very fast and powerful BS2px processor on each board. The Parallax BASIC Stamp Homework Board has extra space to perfectly fit another board, directly on it. Can you guess which board? It's the smallest full featured Parallax processor board that comes from the Parallax Penguin robot (see http://www.p-robot.com/). The Penguin boards would increase the number of BS2 stamp flavored processors to eight! It creates a new BASIC Stamp Supercomputer with eight BASIC Stamps in the Collective. (OctLyzer) It also adds numerous features and peripherals and makes the most powerful Reflective Quantum Analyzer. See the list below showing what four BS2px Penguin boards will add to the QuadLyzer.

4 - BS2px Processors
8 - Light Sensitive Photoresistors
8 - Infrared IR Detector Receiver
4 - Hitachi HM55B Digital Compass sensor
4 - Seven-Segment LED Display
8 - Micro Servos
4 - Piezo Speaker
4 - Battery holders CR123A
4 - 3 Pin Expansion Port
4 - Power Switch
4 - FTDI 232RL Mini USB Programming Port
4 - LED

and 

128 MHz Speed (32 MHz Turbo x 4)
76,000 IPS (19,000 IPS Each Board x 4)
512 Byte RAM (38 x 4 Byte)
512 Byte Scratch Pad Ram (128 Bytes x 4)
8-Bit x 16K EEPROM (8 x 2K Bytes x 4) 
16,000 Instructions (4,000 Instructions x 4)
PBASIC Extended Set Programming Instructions

This expanded processor machine would also have the features, peripherals and capabilities of the first four BS2 processors. Connection: the four new BS2px boards would connect to the Stamp Collective using their port routed to Party Line Pin 0. There are other options, i.e. the four BS2px boards could use just one port, freeing up three others, and acting like a powerful co-processor.
  
UPGRADES
This is a rather large upgrade of the AM Algorithm Machine which was introduced in August of 2010 (see link). The AM was constructed with two Basic Stamp 1 Project Boards. It contained one 8-bit parallel Tiny BUS. It had no display. At that time, no Quantum World projects existed. The new
QuadLyzer will have a modified spin off version of TINY AI from the Tri-Core project and the Seed project. Development will include the Quad Operating System or Q-OS.


ADDED DIMENSIONS 
The QuadLyzer has four sets of initial universal space dimensions set by four processors. The fifth dimension of time is being introduced by use of a hardware clock chip and associated clocking software. Clock chip time is accessed and preset to initializations of T1, T2, T3, and T4. But what is the sum total of the representative dimensional quantities? The processors contain [A] XYZT, [B] X’Y’Z’T2, [C] X’’Y’’Z’’T3, and [D] X’’’Y’’’Z’’’T4. [Time] exists within each. [Reflective Quantum Representative States] bump this up to a maximum of infinity +.

LINKS
Great Source of BS2 Code (PX Version)
http://www.p-robot.com/
Seed Project Part 1 & 2
http://humanoidolabs.blogspot.tw/2012/07/seed-supercomputer.html
http://humanoidolabs.blogspot.tw/2012/07/seed-supercomputer-part-2.html 

AM Algorithm Machine
http://humanoidolabs.blogspot.tw/2010/08/am-algorithm-machine_24.html
Tri-Core
http://forums.parallax.com/showthread.php?114352-TriCore-Stamp-Supercomputer&p=822511#post822511
The Two-Stamp BSS (BS2sx + BS2px)
http://forums.parallax.com/showthread.php?108121-BASIC-Stamp-Supercomputer&p=772979&viewfull=1#post772979

Tiny AI Artificial Intelligence Software for the Seed
http://humanoidolabs.blogspot.tw/2012/07/tiny-ai-artificial-intelligence.html

Tiny AI Artificial Intelligence Software for the Tri-Core
http://forums.parallax.com/showthread.php?114352-TriCore-Stamp-Supercomputer&p=825238&viewfull=1#post825238 
Preparing Enumeration Pins
http://forums.parallax.com/showthread.php?114352-TriCore-Stamp-Supercomputer&p=825238&viewfull
 

QuadLyzer Quantum Analyzer at Big Brain Blog
http://humanoidolabs.blogspot.tw/2012/10/quadalyzer-quantum-analyzer.html
Parallax 4x20 Serial LCD
http://www.parallax.com/Store/Accessories/Displays/tabid/159/CategoryID/34/List/0/SortField/0/Level/a/ProductID/51/Default.aspx 
Parallax Piezo Speaker
http://www.parallax.com/Store/Accessories/Sound/tabid/164/CategoryID/38/List/0/SortField/0/Level/a/ProductID/106/Default.aspx 
Parallax Basic Stamp Homework Board
http://www.parallax.com/Store/Microcontrollers/BASICStampDevelopmentBoards/tabid/137/CategoryID/12/List/0/SortField/0/Level/a/ProductID/133/Default.aspx
"What's a Microcontroller?" (v3.0) (354pp.) Download text (4.97 MB)
http://www.parallax.com/Portals/0/Downloads/docs/prod/edu/28123-WAM-v3.0.pdf
http://www.parallax.com/Portals/0/Downloads/docs/prod/edu/WAMv3.0-Errata-v1.0.pdf

Parallax Downloads Page
http://www.parallax.com/tabid/440/Default.aspx
April 2009 Parallax CD ISO image

ftp://ftp.parallax.com/cd/iso/2009-04/ParallaxCD-042009-MOSS.iso
BASIC Stamp (2e, 2sx, 2p, 2pe) Firmware Revision

http://www.parallax.com/Portals/0/Downloads/docs/prod/stamps/BASIC-Stamp-Firmware-Revisions.zip
PBASIC 2.5 Syntax Enhancement Notes Provides overview of what's new with the PBASIC language in the BASIC Stamp Windows Editor v2.0 and higher
 

http://www.parallax.com/Portals/0/Downloads/sw/bs/win/PBASICCompiler2_0Beta2.pdf
BS1 and BS2 Conversion Tips (159 KB)

http://www.parallax.com/Portals/0/Downloads/docs/prod/stamps/BS1nBS2ConvTips.pdf
BASIC Stamp Syntax and Reference Manual 2.2 (5.3 MB)

http://www.parallax.com/tabid/181/List/1/ProductID/143/Default.aspx
http://www.parallax.com/Portals/0/Downloads/docs/prod/stamps/web-BSM-v2.2.pdf

BASIC Stamp Technical Comparison

http://www.parallax.com/LinkClick.aspx?link=436
http://www.parallax.com/Portals/0/Downloads/docs/prod/stamps/stampscomparison.pdf

BASIC Stamp Frequently Asked Questions (108 KB)

http://www.parallax.com/Portals/0/Downloads/docs/prod/stamps/BasicStampFAQ.pdf
StampWorks Manual v2.1 (2 MB)

http://www.parallax.com/tabid/181/List/1/ProductID/144/Default.aspx
http://www.parallax.com/Portals/0/Downloads/docs/books/sw/Web-SW-v2.1.pdf

BASIC Stamp 1 Application Notes (516 KB)

http://www.parallax.com/Portals/0/Downloads/appnt/stamps/bs1Appnotes.pdf
BASIC Stamp 2 Application Notes (86 KB)

http://www.parallax.com/Portals/0/Downloads/docs/prod/stamps/BS2Appnotesv1_9.pdf
How to program BASIC Stamps on a MAC (2.4 MB)
http://www.muratnkonar.com/otherstuff/macbs2/
http://www.muratnkonar.com/otherstuff/macbs2/downloads.shtml

The Elements of PBASIC Style (210 KB)
http://www.parallax.com/Portals/0/Downloads/docs/prod/stamps/pbasicstyle.pdf
Microcontroller Projects with the BASIC Stamp 2nd Ed (583 KB)

http://www.parallax.com/Portals/0/Downloads/docs/article/MicroProjectsExcerpt.pdf


 QUADLYZER COMPARED WITH AM ALGORITHM MACHINE





ABOVE Two views of the AM Algorithm machine built two years ago to experiment with new parallel computing algorithms. It contained two BASIC Stamp One processor boards. This machine is the precursor project to the current QuadLyzer. Note the AM had no display and relied on the supporting DEBUG screen for output. Also the AM had no peripheral sensors for input and output and was based solely on internal computations.

LEFT photos Compare the QuadLyzer form factor, which contains four processor boards in the first version. The QuadLyzer contains a four line green screen display to reflect quantum states represented by the four processor boards.

Wednesday, October 17, 2012

MGT Molecular Genius Telescope

Big Brain’s New Paradigmic Molecular Genius Telescope MGT
The New MGT Molecular Genius Telescope
The union of the MAC Molecular Amp Cascader, borrowed technology from the GMM Genius Molecular Microscope, and now reworked for pipe fitting atop the PGT Telescope, introduces the all new telescope - the MGT Molecular Genius Telescope.

-- the MGT Telescope is the most powerful telescope ever created by the Big Brain Space program ---

 You’ve obviously enjoyed seeing the spectacular views taken through the new massive PGT telescope. This telescope has bridged across billions of light light years towards the edge of the Universe. One behind the scenes technique machine used to increase the gains returned from the PGT is the Molecular Stage Cascader MSC. The Molecular Cascader, also referred to as the Microscopy Amplifier Cascader when on the GMM Microscope, is a machine device used on the GMM Microscope to apply cascading stages of amplification (AMP) which results in dramatic and vast increases of power (MAG), (GAIN) and (IM) image scale. THE PGT Telescope is now born, expanded to include the GMM's (Genius Molecular Microscope) Molecular Stage Cascader MSC to (AMP) and zoom in highly detailed portions of a wide FOV Cosmic View. This rides atop the telescopic ocularic section for input amplification and permits highly detailed magnified power enlargement of selected areas much like the results obtained from refinement stages within the GMM.

-- The MGT Telescope is the largest of its type in the world and known space --

For more information about the GMM Microscope, the Microscopy Amplifier Cascader, and the operational diagram details, refer to:
http://humanoidolabs.blogspot.tw/2012/10/gmm-genius-molecular-microscope-diagram.html

Interface Molecular Stage Cascader & PGT Telescope

Interface a Molecular Stage Cascader to the New PGT Telescope

Hooking Up the Molecular Stage Cascader MSC
to the PGT Telescope
 
The Experiment - It’s an exciting and original bold experiment to attach the new created Molecular Stage Cascader atop the PGT Telescope (within and above the base data train) and view the first incoming results and the spectacular effects never seen before. What strange new worlds will be revealed in this new emerged world macrocosm? What creatures of the telescope honed ultimate deep will emerge? Will new previously invisible life forms living sub stratas make their presence known? The answers to all these questions can be answered by installing the MSC. The permanent use of the new MSC now ushers in a new age of telescopes. This creates a type of Molecular PGT Telescope or MPGT Molecular Paradigmic Genius Telescope. The name is shortened to MGT Molecular Genius Telescope.


"The first test will obtain a baseline data set and create a specific strip FOV and engage the MSC on a selected regio. We will leave the MSC running in the AMP Cascading mode for fourteen cycles and then create a comparison pool noting the gains. The interest is in the number of cascations possible without the result of empty MAG. Some peak number will result from which the machine will tune."

Microbots

BIG BRAIN MACHINE TECHNOLOGY
MICROBOTS

A Microbot is larger than a nanobot. Though it's less than 1mm in size, it's 1,000 times larger than nanobot. This is still very small, measured in micrometers. A nanobot is measured in terms of nanometers.


The development of Microbots and Nanobots continues at Humanoido Labs. There are two types of Microbots. One type is biologically based and designed to go into the human body with the potential applications of delivering point therapy to cancerous tumors, keeping arteries clean, getting rid of toxins and repairing internal damage. It's thought that such bots will be delivered to physiological sites by magnetic propulsion induce by Nuclear Magnetic Resonance machines. The second type of Microbot is the one being developed at Humanoido Labs. It goes into a machine and has many potential applications (see Apps of a Machine Microbot). It's delivery is unique, depending on who, what, where, when or simply the 4W rule. The machine Microbot starts out as a sequence of software that instructs and tells the inside of the chip how to build and operate the Microbot. The Microbot is controlled, adjusted, moved, finessed and operated through the software instruction control panel, comprised of a programming language. The code is like sequence patterns of DNA which offer the basic building blocks of the Microbot.


APPS OF A MACHINE MICROBOT

* Exploring the world inside a chip
* Measuring inside a chip with sensors (1)
* Acting in specific ways
* Repairing circuits and functions
* Adding internalized functions
* Modifying behaviors
* Reporting
* Eliminating machine virus
* Getting rid of spurions (spurious radiative effectors)
* Rebuilding specific pathways
* Creating various cartographic data sets 

Sources: The Field of Microbotics

http://en.wikipedia.org/wiki/Microbotics

Microbotics (or microrobotics) is the field of miniature robotics, in particular mobile robots with characteristic dimensions less than 1 mm. The term can also be used for robots capable of handling micrometer size components.


MICROBOT UNDER CONSTRUCTION AT HL
In a recent Microbot construction project at Humanoido Labs, the bot is forged and machined with software designs and then injected into the machine and site delivered. It then sets up sensors and establishes the collection of data. Cartographic data is combined with sensor data to create fields of analytical parameters on the chip's functions. Analysis of the data provides a view into the chip's interior unlike ever seen before.

STAY TUNED & BUILD YOUR OWN MACHINE MICROBOT
Check back frequently and stay tuned on this blogger channel as it's likely we may present the entire instructions to create your own machine Microbot and inject it inside the chip. 

Monday, October 15, 2012

M42 PGT Paradigmic Genius Telescope

BIG BRAIN SUPERCOMPUTER
PGT PARADIGMIC GENIUS TELESCOPE VIEWS M42

MONDAY OCTOBER 15TH 2012 - STUNNING VIEWS! were obtained using the Big Brain's PGT Super Telescope. Observations were completed on Monday, driven with a new portal window designed to show a wider view FOV (thanks to the experimental FR) with more visible detail and less cluttering of telescope controls.




M42 is the birthplace of stars and shows a wealth of detail in expanding hydrogen dust and filamentary detail. Glowing nebulosity is lit up by nearby and embedded stars. The PGT is an experimental telescope that's performing beyond all expectations.

The successful new portal version is functional though still under construction - it appears it will be chosen for primary use. This is the second image captured with the PGT. The previous observation did focusing on a Black Hole at the center of galaxy with a massive Event Horizon and a Relativistic Space Time Jet.


EXPANSION
One possible future expansion of the PGT may include the GMM's (Genius Molecular Microscope) Stage Cascader to zoom in to highly detailed portions of a wide FOV Cosmic View. This will ride atop the ocularic section for amplification and permit highly detailed magnified enlargement of selected areas much like results obtained from refinement stages within the GMM.

THE EXPERIMENT
It will be an exciting experiment to attach the Molecular Cascader atop the PGT Telescope and view the results. If permanently used, it could usher in a new age of telescope. One proposal is Molecular PGT or MPGT for Molecular Paradigmic Genius Telescope. This may be shortened to MGT Molecular Genius Telescope.

Molecular Stage Cascader

Build a Molecular Stage Cascader for the PGT Telescope

GMM's MAC
Work has proceeded behind the scenes to remove the GMM (Genius Molecular Microscope) Microscope’s "Microscopy Amplifier Cascader MAC" and rework it to construct and establish a new "MSC Molecular Stage Cascader" with the intention of fitting it onto the massive PGT Telescope to see what gains result.

-- It's like attaching a microscope to a telescope and attaining useful increases of MAG. --

First, the MAC is sectioned off from the GMM and then adapted to pipe fittings of the PGT. Keep in mind, these are data pipes of a different kind involving the handling and dissemination of data though electronics and electro optics. There’s an estimated 14 fields of technology wrapped into the PGT Telescope. Taking the MAC and converting it to the MSC for use with the PGT could result in all new technology and potential discoveries. It’s a chance the Big Brain is willing to take, with the investment of time, energy and thought power to make this new machine happen.

The first test will obtain a baseline data set and create a specific strip FOV and engage the MSC on a selected regio. We will leave the MSC running in the AMP Cascading mode for fourteen cycles and then create a comparison pool noting the gains. The interest is in the number of cascations possible without the result of empty MAG. Some peak number will result from which the machine will tune.

How to Go Into Space

BIG BRAIN REVEALS
HOW TO GO INTO SPACE

THE BIG BRAIN reveals how to conduct your own space program and safely go into space, on a hobby shoestring budget and within a reasonable amount of time.

Shanghai: Tall skyscraper machines reach Next Space

There are several ways to get into space, either by telepresence or by physical attendance. Machines and equipment can serve as a proxy in space exploration. A telescope acts like a time machine bringing great distances in space and time closer to home. There are numerous techniques for actually going into space. It depends on what type of space we're considering traveling to.

The Big Brain has defined seven main types of space. Some space is explored by observation only, such as microscopic space. Other space can be explored by the injection of nano machines that can report back with their effectual behaviors. Micro Machines are built within the chip, for example, and can send back observations of the MicroCosmos.

Hong Kong: night aerial photo from atop skyscraper in Next Space

Powerful telescopes, like the Paradigmic Genius Telescope can explore Ultra Space, leading to the EOL Edge of the Universe Boundary of Space Time. Even though Exo Space and Quantum Space is unexplored, great opportunity exists to explore nano space and microscopic inner space, micro space, next space, near space, orbital and solar system space, and ultra space. The Big Brain has found fast, inexpensive, and somewhat ingenious ways to penetrate the mysteries of these cosmic domains.
Taiwan: Jet turbine engine for reaching Near Space
Special techniques, tools and crafts are required to penetrate into the depths of each space domain. Starting with the smallest, nano space is explored by the creation of nanoscopic sized nano machines that exist inside a Propeller chip. The tools to create these nano machines are made of software. Next, microscopic space is explored with the creation of the PMM or Paradigmic Molecular Microscope, built to function with cascading data that penetrate down to the size of molecular structures. Now enter micro space. This great educational domain of space is explored with rockets, helicopters, flying aircraft, gliders, tethers, balloons, kites, parachutes, propelled capsules, instruments and sensors, special forms of propulsion using pressure and forms of potential and kinetic energy. Don't forget, grand exploration can take place in Micro Space with the use of elevator machines, escalators, and mag lift transports that accelerate horizontally off the ground.
Taiwan: Futuristic machine travels through Micro Space
The realm of micro space is vast and can be explored in numerous ways, safely by exercising caution and common sense. Insects, or insectronauts can be launched and returned to the earth. G-forces are measured and 0-G is studied. Next up is next space. A human journey into next space can involve a very tall skyscraper. It's possible to go up 1,555-feet or 1/3rd mile, again, in a relatively safe manner. Many of the machines of micro space can penetrate into next space. While human flight is more defined in next space, it can also happen in micro space. Now enter the vast domain of near space, otherwise known as hobby space. Humans can get into near space most reliably and relatively safe by air travel with passenger jets. One popular method of exploring near space is with balloons that loft robots. All these space programs use methods of aerial imaging to collect data. Some spectacular aerial imaging results from using skyscraper "machines" to gain access to Next Space. Either a top floor accessed by elevator or direct observation points on top of the skyscraper by supervised permission is possible with all safety measures being implemented.

Taiwan: Mall escalators are instrumental in exploring Micro Space
Warning & Disclaimer: On top of skyscrapers, a brisk wind can treat a human like a light-weight sheet of paper and loft the person overboard! So do careful planning as the Big Brain recommends all exploration by window indoors.

Hong Kong: Modern magnetic levitation transports accelerate through Micro Space
Next up is solar system space, going up from orbital space. Orbital space has satellites which can be accessed and utilized. Telescopes become important to explore solar system space. One favorite method utilized by Big Brain is to link satellites together to form powerful machines in space for a new look at space and to create new methods for space exploration. For more information about this approach, see ULT, NULT and PGT.

NASA satellites located in Earth Orbit, Solar System Space, on moons and planets, and in Ultra Space, are paid for by American taxpayers who have free use
Finally, ultra space takes us to the edge of the universe with powerful telescopes like the ULT Ultra Large Telescope, the NULT New Ultra Large Telescope, and the PGT Paradigmic Genius Telescope. These telescopes can create imagery showing great discoveries in space and time. All photos (c) copyright humanoido unless otherwise noted.

How to Make Life in the Universe

A Universe Inside the Big Brain Achieves Life on March 1st, 2011
Big Brain's universe of life
HOW TO MAKE LIFE IN THE BRAIN UNIVERSE 
Big Brain Achieves Cellular Automatronic Life - Propeller Program gives life to the Brain 

Big Brain Date March 1st, 2011  08:27 am
Code p17#333 

Above Actual photo of this amazing Universe of Life, which is still unfolding inside the Propeller Brain, has evolved over a time period of one hour! Looking like stars in the galaxy, these are actually evolutionary cellular life forms.

Left Wired for Evolving Automatronic Life, the Brain is alive as seen in this window of the unfolding Universe portal, made possible by a Parallax 3.5-inch TV as a viewer and computational Propeller chips.

Sometimes you find life in the strangest of places living under the strangest conditions. This is one such example, which is developed by Cambridge mathematician John Conway. In this Brain Automata, Life is created through collections of living cells that are born, breed and die, based on the mathematical conditions imposed upon Universe life. Throughout their lifetime, they form groups and patterns of considerable importance.


Conway's work was popularized in a 1970 Scientific American article. It has become a must know/must read work for Artificial Intelligence followers as well as a litmus for various fields of mathematical academia.

The universe of Life is an infinite two-dimensional orthogonal grid of square cells, each of which is in various states, alive, breeding, or dead. Each cell interacts with eight neighbors, which are horizontally, vertically, or diagonally adjacent.

During each step of evolutionary time, the following happens: 


For a space that is 'populated'

  • Each cell with one or no neighbors dies, as if by loneliness.
  • Each cell with four or more neighbors dies, as if by overpopulation.
  • Each cell with two or three neighbors survives.
For a space that is 'empty' or 'unpopulated' Each cell with three neighbors becomes populated.The initial pattern constitutes the seed of the system. The first generation is created by applying the above rules simultaneously to every cell in the seed — births and deaths occur simultaneously, and the discrete moment at which this happens is sometimes called a tick (each generation is a pure function of the preceding one). The rules continue to be applied repeatedly to create further generations.

Starter Code Downloads - PropBASIC demo program
"Conway's Game of Life" 
Here is another PropBASIC demo program. This is Conway's game of life on a 256x192 matrix. The pbas code will run under Propbasic language and spin code runs with Spin language - both are written for the Parallax Propeller chip. Output is NTSC from the Demo board.  Code presented by Bean at the Parallax Forum:
http://forums.parallax.com/showthread.php?124495-Fill-the-Big-Brain&p=981338&viewfull=1#post981338
Download here
video_life.pbas

video_life.spin

MonoVid.spin
 

Expanding the Code
Try changing the variables. For example, the number of life generations can indicate the level of evolution of a given life form's technology. Try making cells into equivalent neural maturations and relate their effectual evolutionary traits.

Hardware
The code runs on the Big Brain. The starter code shown here will run on the Parallax Propeller Demo Board. See parallax.com.

Saturday, October 13, 2012

Big Brain Space

BIG BRAIN SPACE
Updated - Types of Big Brain project space for exploration

Added the range of Infinitesimal, the human journey into Near Space, the range of low Earth Orbit, and various devices created by the Big Brain Space Program to explore space.

Note there are two space regions currently unexplored by the Big Brain Space Program - Exo Space and Quantum Space. Although the Big Brain Space Program has a minimal hobby status budget, it has drawn upon the ingenuity of using common resources to achieve flight and continue with various forms of exploration within seven defined regions of space, using DIY telescopes, microscopes, country mega projects, and various space crafts.